A new steam-meter

A New Incinerator Control Meter is Needed

The performance of an incinerator is affected markedly by the moisture content of the refuse. To maintain a satisfactory £ire and a high rate of operation under con� ditions of varying refuse moisture is difficult at best: As the flue gas reflects the refuse analysis, a meter is proposed that would report the ratio of CO, and H,O vapor in the furnace exit gas. The CO2/H20 ratio varies from 2.0 ...

Silicone-polyether Copolymers as New Steam Turbine Oil Demulsifiers

Turbine oil plays an important role in supporting optimal steam turbine performance. Some additives in turbine oil can cause emulsification when the oil is contaminated by water, so demulsibility is a very important property of the steam turbine oil. In order to improve the demulsibility of steam turbine oil, two kinds of polyether-silicone comb copolymers are synthesized and used as steam turb...

Features of New Steam Turbine Control System

OVERVIEW: Along with advances in system component technologies, modern state-of-the-art power plant control systems are being developed by incorporating such advanced technologies as extensive digitization of high-speed control circuits, interconnection with other equipment over open interfaces, and a repertory of diverse multiplexed systems. Based on Hitachi Integrated Autonomic Control System...

New Class 6 indicator monitors steam cycles.

Several steps forward: a new meter for multiple patient use.

Point-of-care (POC) blood glucose testing is becoming ubiquitous in the hospitals because of ease of use, timely results, and cost effectiveness. Historically, these POC devices were designed and regulated for home use by patients with diabetes. Their transition into the hospital multipatient setting has introduced the real risk of cross-contamination and has exposed inadequate accuracy standar...