A New Design of 5G Planar Antenna based on metamaterials with a high gain using array antenna

نویسندگان

چکیده

In this paper, a symmetrical monolayer metamaterial superstrate is placed on microstrip patch antenna resonant at 3.5 GHz. MTM based CSRR Complementary Split Ring Resonators, constituting two rectangular rings opposite splits both ends, which are printed Rogers RT 5880 type substrate with relative permittivity of 2.2, tangential loss 0.0009, and thickness 0.508mm. This resonator capable exhibiting an ε-negative permittivity. Moving loaded 2 × 3 grating single radiating element, provides gain increase from 4.66 dBi to 5.67 was found its operating frequency, the radiation pattern directional stable over entire frequency band. For 4×1 array MTM, reaches about 9.84 dBi. proposed suitable for 5G mobile applications.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A New Design of Log-Periodic Dipole Array (LPDA) Antenna

This paper presents a new approach for design of the log-periodic dipole array antenna (LPDA) based on using of different design parameters in the LPDA elements to control the antenna behavior. In the proposed procedure, the design parameters can control the value of forward gain over the operating frequency range, and also adjust the gain flatness. Furthermore, this design procedure can decrea...

متن کامل

an infinite planar array of rectangular microstrip patch antenna analysis

the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...

15 صفحه اول

Microstrip Antenna Gain Enhancement using Near Zero Refractive Index Metamaterials

Some useful features of microstrip patch antennas are low profile, low weight and easy fabrication. However this type of antenna suffers from having a low gain, caused by propagation surface waves. In this paper, a new near zero refractive index metamaterial (MTM) unit cell is designed and fabricated as a superstrate over a Rectangular Microstrip Patch Antennas (RMPA). In order to obtain a maxi...

متن کامل

Design and Fabrication of Plasma Array Antenna with Beam Forming

In this paper, the design and implementation of plasma antenna array with beam forming is discussed. The structure consists of a circular array of plasma tube enclosed in a unipolar UHF band monopole antenna. Beam forming is possible by stimulated plasma tubes. The combination of the above antenna with plasma excitation controller makes a beam forming smart antenna. An experimental model in UHF...

متن کامل

Design of a Dualband Omnidirectional Planar Microstrip Antenna Array

This paper proposes and designs a new method of dualband omnidirectional planar microstrip antenna array. A cascade of transposed microstrip lines have been adapted to produce effective antenna structures that radiate omnidirectionally, with high efficiency, low reflection, and useful radiation patterns. In this paper, the antenna structure has been found to have low-pass characteristics due to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: ITM web of conferences

سال: 2022

ISSN: ['2271-2097', '2431-7578']

DOI: https://doi.org/10.1051/itmconf/20224801007