A New Approach to Synthesizing NiO-YSZ Nanocomposite as Solid-Oxide Fuel-Cell Anode Functional Layers by Electrophoretic Deposition

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation of NiO-YSZ/YSZ bi-layers for solid oxide fuel cells by electrophoretic deposition

A simple and cost-effective method, starting with electrophoretic deposition (EPD) on a carbon sheet, has been developed for preparation of a iO-YSZ anode and thin, gas-tight YSZ electrolyte layer on it for use in solid oxide fuel cells (SOFCs). The innovative feature of this approach nables the deposition of anode materials as well as the YSZ electrolyte, which were subsequently co-fired in ai...

متن کامل

Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects

In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...

متن کامل

A new approach to microstructure optimization of solid oxide fuel cell electrodes

Designing optimal microstructures for solid oxide fuel cell (SOFC) electrodes is complicated due to the multitude of electro-chemo-physical phenomena taking place simultaneously that directly affect working conditions of a SOFC electrode and its performance. In this study, a new design paradigm is presented to obtain a balance between electrochemical sites in the form of triple phase boundary (...

متن کامل

Three-dimensional analysis of solid oxide fuel cell Ni-YSZ anode interconnectivity.

A method is described for quantitatively analyzing the level of interconnectivity of solid-oxide fuel cell electrode phases. The method was applied to the three-dimensional microstructure of a Ni-Y2O3-stabilized ZrO2 (Ni-YSZ) anode active layer measured by focused ion beam scanning electron microscopy. Each individual contiguous network of Ni, YSZ, and porosity was identified and labeled accord...

متن کامل

Operation of Ni-YSZ Anode Supported Solid Oxide Fuel Cell on Different Simulated Syngases

Ni-YSZ anode supported solid oxide fuel cells (ASCs) were tested under various simulated syngas. There was no voltage degradation of the cell operated on 41%H2-7%CH4-6%CO-11%CO2-35%H2O fuel condition for nearly 450 hours. However, the high vapor content reduced the open circuit voltage (OCV) and discharge voltage. The cells run steadily with most dry syngas until the simulated reforming tempera...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Materials Science Research

سال: 2012

ISSN: 1927-0593,1927-0585

DOI: 10.5539/jmsr.v1n2p157