A Multi-Sensor Based Roadheader Positioning Model and Arbitrary Tunnel Cross Section Automatic Cutting
نویسندگان
چکیده
منابع مشابه
An approximate model for slug flow heat transfer in channels of arbitrary cross section
In this paper, a novel approximate solution to determine the Nusselt number for thermally developed, slug (low-prandtl), laminar, single phase flow in channels of arbitrary cross section is presented. Using the Saint-Venant principle in torsion of beams, it is shown that the thermally developed Nusselt number for low-prandtl flow is only a function of the geometrical parameters of the channel c...
متن کاملCross Section Effects on Convergence-Confinement Method in Multi Stage Tunnel Excavation
Dimensionless coefficient () in convergence confinement method shows the relaxation of stress in the wall of the tunnel at different excavation movements. This factor is considered a constant number in previous studies and tunnel geometric characteristics (such as depth, cross-section shape, radius, soil material, etc.) are not included in its determination; however, ignoring these effects can...
متن کاملNumerical simulation of water entry of tunnel cross section with different deadrise angles and tunnel radiuses
This study deals with the numerical modeling of symmetrical water entry of tunneled sections. In this study, firstly, the water entry problem of a wedge section without tunnel in four different deadrise angles was numerically modeled. The obtained results related to the pressure distribution on these sections and the maximum pressure have been compared with the experiment results. In the next s...
متن کاملDynamics Analysis on Roadheader Cutting Head Based on LS-DYNA
The dynamic performances of head cutter for boom-type excavator were researched, and the corresponding dynamic equilibrium equations were derived. Based on the explicit dynamics analysis techniques of the Software ANSYS/LS-DYNA, transient dynamic analysis was carried out to simulate the cutting process of head cutter, and the main kinetic parameters were achieved. Finally, the cutting performan...
متن کاملan approximate model for slug flow heat transfer in channels of arbitrary cross section
in this paper, a novel approximate solution to determine the nusselt number for thermally developed, slug (low-prandtl), laminar, single phase flow in channels of arbitrary cross section is presented. using the saint-venant principle in torsion of beams, it is shown that the thermally developed nusselt number for low-prandtl flow is only a function of the geometrical parameters of the channel c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2019
ISSN: 1424-8220
DOI: 10.3390/s19224955