A multi-band MIMO antenna system with coupled-fed modified rectangular patch elements for 5G systems
نویسندگان
چکیده
A four-port multiple input output (MIMO) antenna system constructed of four compact dual-band (38/60 GHz) microstrip patch antennas is proposed for 5G mobile applications. Each individual element optimized to achieve the desired performance overall MIMO system. Numerical and experimental investigations are achieved assess both single-element It shown that simulation results agree with measurements, show good The bandwidths around 38 GHz 60 about 2 3.2 GHz, respectively. including return loss at each port coupling coefficients between different ports investigated. radiation patterns produced when excited alone be suitable spatial diversity scheme. They have a high efficiency exhibited by balloon-like shaped pattern upper lower frequency bands. envelope correlation coefficient (ECC) gain (DG) targeted
منابع مشابه
Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملA Design Rule for Inset-fed Rectangular Microstrip Patch Antenna
In our paper, an inset-fed microstrip patch antenna has been designed and the dependency of resonant frequency on the notch gap and the feed line geometry has been studied. Our study suggests that a narrower notch resulted in better impedance matching. A design rule has also been formulated and presented the performance of the proposed design. Key-Words: Inset-fed, microstrip antenna
متن کاملModified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band
The U-slot micro-strip patch antennas were originally developed for bandwidth broadening applications. This study presents a transmission line feed to modify the U-slot stacked rectangular micro-strip patch antenna for Ultra-Wide Band (UWB) communications. The modified antenna has a U-cut loaded with parallel slits and corner slots and is printed on a dielectric substrate of FR4 with relative p...
متن کاملRectangular Ring Microstrip Patch Antenna for Ultra-wide Band Applications
ABSTRACT: The printed antenna is one of the best antenna structures, due to its low cost and compact design. In this paper, we present a new approach to improve the radiation effectiveness and the performance of antennas by miniaturization of the size. Indeed, we have studied the performance of ultra wideband antenna which consists of a ring-shaped patch. This study was made for the whole frequ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Computing and Engineering
سال: 2022
ISSN: ['2735-5977', '2735-5985']
DOI: https://doi.org/10.21622/ace.2022.02.2.073