A Modified Friction Stir Welding Process Based on Vortex Material Flow
نویسندگان
چکیده
منابع مشابه
Material Flow Visualization in Friction Stir Welding via Particle Tracing
This work deals with the modeling of the material flow in Friction Stir Welding (FSW) processes using particle tracing method. For the computation of particle trajectories, three accurate and computationally efficient integration methods are implemented within a FE model for FSW process: the Backward Euler with Substepping (BES), the 4-th order Runge-Kutta (RK4) and the Back and Forth Error Com...
متن کاملFriction Stir Welding Process Optimization: Experimental Methods
Introduction The Friction Stir Welding (FSW) process is an innovative technique to join metals in the plasticity field, thus not reaching the melting temperature and consequently the liquid state as it happen in traditional welding processes. This feature of the FSW proved an enhancement of the fatigue behaviour and strength of the joints, leading some companies to adopt the process for the man...
متن کاملThe Effect of Tool Geometry on Material Flow Behavior of Friction Stir Welding of Titanium Alloy
Article history: Received 1.11.2012 Received in revised form 10.12.2012 Accepted 10.12.2012 Based on the RNG k-ε model, the finite volume model of friction stir welding of Ti6Al4V alloy is established by ANSYS FLUENT software. The effect of rotational tool geometry on titanium alloy flow behaviour is exhibited. The results of numerical simulation show that the flow direction of material near th...
متن کاملNumerical modeling of friction stir welding process: a literature review
This survey presents a literature review on friction stir welding (FSW) modeling with a special focus on the heat generation due to the contact conditions between the FSW tool and the workpiece. The physical process is described and the main process parameters that are relevant to its modeling are highlighted. The contact conditions (sliding/sticking) are presented as well as an analytical mode...
متن کاملCoupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys
In this work, the finite element simulation of dissimilar friction stir welding process is investigated. The welded materials are AA 6061-T6 and AA 7075-T6 aluminum alloys. For this purpose, a 3D coupled thermo-mechanical finite element model is developed according to the Coupled Eulerian-Lagrangian (CEL) method. The CEL method has the advantages of both Lagrangian and Eulerian approaches, whic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Mechanical Engineering
سال: 2020
ISSN: 1000-9345,2192-8258
DOI: 10.1186/s10033-020-00499-3