A microstructured laser with modulated period for beam control
نویسندگان
چکیده
In this paper, a microstructured laser with modulated periodic microstructures for beam control is proposed the first time. Lasers using can emit lower vertical divergence angle same number of microstructures. And lasers specific period length transmit in direction. These emitting beams different emission directions be integrated into an array. array used directly as transmitter chip LiDAR. Both simulation and experimental results show that effectively reduce angle. experiment, lowest 0.88° large sweep range 41.5° have been obtained. A horizontal 4.3° achieved taper structure. Typical optical power 29 mW.
منابع مشابه
Laser Beam Hazard for flight personnel
Lasers can produce a beam of light of such intensity that permanent damage to human tissue, in particular the retina of the eye, can be caused instantaneously, even at distances of over 10 km. At lower intensities, laser beams can seriously affect visual performance without causing physical damage to the eyes; causing transient damage or causing sensation and loss of focus. Laser illumination o...
متن کاملMicrostructured polymer fiber laser.
A microstructured polymer optical fiber doped with Rhodamine 6G dye was fabricated and demonstrated as an optical amplifier and a fiber laser. As an amplifier, the fiber achieved a gain in excess of 30 dB. As a pulsed fiber laser, the fiber exhibited a threshold of 20 microJ, a slope efficiency of 18%, and a lifetime as high as 130,000 shots at 10 Hz. The maximum output energy was 16 microJ. Th...
متن کاملImproved bandwidth in VCSEL with AC Modulated Holding Beam
A modulated holding beam shining a VCSEL above threshold can improve modulation bandwidth by adjusting the semiconductor laser’s relaxation oscillation frequency. The improved modulation characteristics are accompanied by reduced damping rate. By choosing correct parameters, dynamical behavior of system and cavity solitons is changed.
متن کاملYtterbium-Phosphate Glass for Microstructured Fiber Laser
In the paper, we report on the development of a synthesis and melting method of phosphate glasses designed for active microstructured fiber manufacturing. Non-doped glass synthesized in a P₂O₅-Al₂O₃-BaO-ZnO-MgO-Na₂O oxide system served as the matrix material; meanwhile, the glass was doped with 6 mol% (18 wt%) of Yb₂O₃, as fiber core. The glasses were well-fitted in relation to optical (refract...
متن کاملLaser-driven beam lines for delivering intensity modulated radiation therapy with particle beams
Laser-accelerated particles are a promising option for radiation therapy of cancer by potentially combining a compact, cost-efficient treatment unit with the physical advantages of charged particle beams. To design such a treatment unit we consider different dose delivery schemes and analyze the necessary devices in the required particle beam line for each case. Furthermore, we point out that l...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Photonics Journal
سال: 2022
ISSN: ['1943-0655', '1943-0647']
DOI: https://doi.org/10.1109/jphot.2022.3182999