A membrane interferometer

A membrane interferometer.

Freestanding phospholipid bilayers have been assembled spanning shallow, micrometer-sized wells etched into a Si wafer substrate so that the bilayers are near (within hundreds of nanometers) but not in contact with the wafer surface. The proximity of the bilayers to the highly reflective Si/SiO(2) interface allows them to be probed by using fluorescence-interference techniques. These interferom...

Flux locking a superfluid interferometer

The authors demonstrate a flux locking technique using injected heat current to linearize the output of a superfluid helium-4 interferometer. A rotation flux through the interferometer loop produces a shift in the phase of the superfluid order parameter. This shift is nullified via negative feedback by a phase shift caused by the injected heat current. The feedback signal is then a linear funct...

A Digital Cross-correlation Interferometer

Electrically switchable cylindrical Fresnel lens based on holographic polymer-dispersed liquid crystals using a Michelson interferometer

Fabricating an electrically switchable cylindrical Fresnel lens based on holographic polymer-dispersed liquid crystals (H-PDLC) using a Michelson interferometer is reported. Simplicity of the method and possibility of fabricating different focal length lenses in a single set up are among the advantages of the method. It is demonstrated that the Fresnel structured zone plate acts as a cylindrica...

Stabilization of a Fabry-Perot interferometer using a suspension-point interferometer

A suspension-point interferometer (SPI) is an auxiliary interferometer for active vibration isolation, implemented at the suspension points of the mirrors of an interferometric gravitational wave detector. We constructed a prototype Fabry-Perot interferometer equipped with an SPI and observed vibration isolation in both the spectrum and transfer function. The noise spectrum of the main interfer...