A Mechanical Property, Non-Destructive Testing and Microstructural Investigation of Power Plant Mechanical Systems
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMicrostructural-Mechanical Property Relationships in WC-Co composites
While empirical relationships between the mechanical properties of WC-Cocomposites and the carbide grain size and carbide volume fraction are qualitatively well-known, the influence of other microstructural features on the macroscopic properties hasbeen less clear. In this thesis, a comprehensive study of the effect of the interfacecharacter distribution (grain shape and misorie...
متن کاملINVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD
The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...
متن کاملNon-destructive mechanical characterisation of UVA/riboflavin crosslinked collagen hydrogels.
AIMS To establish a non-destructive method of characterising the mechanical properties of collagen hydrogels to model corneal tissue and to examine the effect of photochemical crosslinking on their mechanical properties. METHODS Collagen hydrogels were manufactured, submerged in 0.1% riboflavin solution and crosslinked using two UVA tube bulbs with an intensity of between 2.8 and 3.2 mW/cm(2)...
متن کاملEffect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Material Science and Engineering with Advanced Research
سال: 2017
ISSN: 2059-4496
DOI: 10.24218/msear.2017.24