A lapping-based test method to investigate wear behaviour of bonded-abrasive tools
نویسندگان
چکیده
Grinding-wheel wear is a critical factor affecting grinding performance and tool cost. Unfortunately, tests – particularly with superabrasives can be notoriously time-consuming. Therefore, novel lapping-based method proposed for investigating behaviour of the grit-bond system. Wear were performed in (i) lapping, (ii) surface grinding, (iii) cylindrical range grit-shape aspect ratios grit-toughness values same systems. Results showed that all three methods yielded similar trends. This indicates lapping could viable substitute lengthy tests, resulting shorter testing times smaller specimen sizes.
منابع مشابه
construction and validation of a computerized adaptive translation test (a receptive based study)
آزمون انطباقی رایانه ای (cat) روشی نوین برای سنجش سطح علمی دانش آموزان می باشد. در حقیقت آزمون های رایانه ای با سرعت بالایی به سمت و سوی جایگزین عملی برای آزمون های کاغذی می روند (کینگزبری، هاوسر، 1993). مقاله حاضر به دنبال آزمون انطباقی رایانه ای برای ترجمه می باشد. بدین منظور دو پرسشنامه مشتمل بر 55 تست ترجمه میان 102 آزمودنی و 10 مدرس زبان انگلیسی پخش گردید. پرسشنامه اول میان 102 دانشجوی س...
A physically-based abrasive wear model for composite materials
A simple physically-based model for the abrasive wear of composite materials is presented based on the mechanics and mechanisms associated with sliding wear in soft (ductile)matrix composites containing hard (brittle) reinforcement particles. The model is based on the assumption that any portion of the reinforcement that is removed as wear debris cannot contribute to the wear resistance of the ...
متن کاملA novel test method for evaluation of the abrasive wear behaviour of total hip stems at the interface between implant surface and bone cement.
After total hip replacement, some cemented titanium stems show above-average early loosening rates. Increased release of wear particles and resulting reaction of the peri-prosthetic tissue were considered responsible. The objective was to develop a test method for analysing the abrasive wear behaviour of cemented stems and for generating wear particles at the interface with the bone cement. By ...
متن کاملAbrasive wear of enamel by bioactive glass-based toothpastes.
PURPOSE To determine the abrasivity of a 45S5 bioactive glass based toothpaste on enamel as a function of the particle size and shape of the glass. METHODS 45S5 glass was synthesized ground and sieved to give various particle sized fractions < 38, 38-63 and 63-110 microns. Two different grinding routes were used: percussion milling and ball milling. The glass powders were formulated into toot...
متن کاملAbrasive Wear in Three-phase Waste-based Polymeric Particle Composites
Original scientific paper The experiment centres on two and three body abrasion in three-phase waste-based composite systems. The composite systems abrasion resistance is defined not only by the physical-mechanical relationships of the separate phases of the composite, but also by the mutual interaction of the phases and on the matrix-filler interface. To describe the composite system abrasion ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CIRP Annals
سال: 2022
ISSN: ['1660-2773', '0007-8506', '1726-0604']
DOI: https://doi.org/10.1016/j.cirp.2022.04.049