A Kriging Model Based Finite Element Model Updating Method for Damage Detection
نویسندگان
چکیده
منابع مشابه
A NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملDAMAGE IDENTIFICATION OF TRUSSES BY FINITE ELEMENT MODEL UPDATING USING AN ENHANCED LEVENBERG-MARQUARDT ALGORITHM
This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference of recorded acceleration of real damaged structure and hypothetical damaged structure, by updating physical parameters in each phase using iterative process of Levenberg-Marquardt algorithm. This algorithm is based on sensitivity analysis and pr...
متن کاملUncertainty Analysis of Damage Identification Results Based on Finite Element Model Updating Method
A full-scale seven-story reinforced concrete shear wall building structure was tested on the UCSD-NEES shake table in the period October 2005 January 2006. The shake table tests were designed so as to damage the building progressively through several historical seismic motions reproduced on the shake table. A sensitivitybased finite element (FE) model updating method was used to identify damage...
متن کاملDamage Detection in Composite Structures Based on Optical Fibre Strain Sensing and Finite Element Model Updating
A prototype system for condition monitoring of composite structures is described that relies on the on-line measurement of dynamic strains in order to detect any deterioration in performance due to the accumulation of damage. Strain data from both long gauge and point optical fibre sensors are employed to update finite element models of the analysed structures. Together with Bragg grating point...
متن کاملFinite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2017
ISSN: 2076-3417
DOI: 10.3390/app7101039