A High Linearity Low Noise Amplifier Using Modified Cascode Structure
نویسندگان
چکیده
منابع مشابه
A Low Noise Cascode Amplifier
A low noise amplifier has been designed using a 2SK117 N channel J-FET as the input device in a cascode [1] configuration. Noise measurements on this amplifier yield a low frequency noise current of 0.25 fA/Yfu and a voltage noise of less than 1.2 n V NHz in the 500 Hz to 50 kHz region. Bloyet et al. [2] suggest a figure of merit of the product of the noise voltage and current as being appropri...
متن کاملA 2.4GHz Cascode CMOS Low Noise Amplifier
A cascode CMOS low noise amplifier (LNA) is presented along with the used design methodology and measurement results. The LNA works at 2.4 GHz with 14.5 dB voltage gain and 2.8 dB simulated noise figure (NF). Powered from a 1.8 V supply, the core measured current consumption is 2.76 mA. An output buffer was designed to match a 50 Ω load and its current consumption is 5.5 mA. The technology used...
متن کاملAdjustable Gain Cascode Low Noise Amplifier
Tower mounted amplifiers (TMA) serve to lower the system noise figure (NF) in cellular base-stations. For performance reasons, the TMA is located as near to the receiving aerial as practical and has to be connected to the rest of the radio at the tower’s base by a long run of coaxial cable. The parameters critical to TMA performance are low NF for reasons of optimizing coverage area, high gain ...
متن کاملA low noise amplifier with improved linearity and high gain
In this paper presents a optimization of linearity of low noise amplifier by using post linearization techniques. in this technique we have used diode connected mosfet as IMD sinker also used interstage matching for gain enhancement and reducing the effect of nonlinearity in common gate stage of cascode amplifier, this has done by using UMC .18um CMOS Technology in cadence tool. We got gain 14d...
متن کاملA Novel Low Voltage, Low Power and High Gain Operational Amplifier Using Negative Resistance and Self Cascode Transistors
In this work a low power, low voltage and high gain operational amplifier is proposed. For this purpose a negative resistance structure is used in parallel with output to improve the achievable gain. Because of using self cascode transistors in the output, the proposed structure remains approximately constant in a relatively large output voltage swing causing an invariable gain. To evaluate the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Korean Institute of Electromagnetic Engineering and Science
سال: 2016
ISSN: 1226-3133
DOI: 10.5515/kjkiees.2016.27.2.220