A High-Efficiency Diode-Clamped Linear Amplifier
نویسندگان
چکیده
منابع مشابه
High Efficiency Class-F Power Amplifier Design
Due to the high increase in and demand for a wide assortment of applications that require low-cost, high-efficiency, and compact systems, RF power amplifiers are considered the most critical design blocks and power consuming components in wireless communication, TV transmission, radar, and RF heating. Therefore, much research has been carried out in order to improve the performance of power amp...
متن کاملCmos High Efficiency Rf Power Amplifier
The design of an integrated CMOS Power Amplifier (PA) for a Jet Propulsion Laboratory (JPL) Synthetic Aperture Radar (SAR) mission is studied. Although there are a number of PA class definitions and published circuits, designing a high efficiency RF PA is still a challenging job. In this thesis, the goal is full integration in Silicon-on-Sapphire (SOS) using on-chip spiral inductors/transformer...
متن کاملHigh-efficiency diode-pumped Tm:YAG ceramic laser
A high efficient Tm:YAG ceramic laser at 2007 nm pumped by a diode laser was demonstrated. The laser performances with Tm doping concentrations of 4 at.% and 6 at.% were comparatively analyzed. The continuous-wave (CW) laser powers up to 2.11 W and 1.68 W have been obtained for Tm:YAG ceramics at 6 at.% and 4 at.% doping levels, corresponding to the slope efficiencies of 43.6% and 53.8% respect...
متن کاملBroadband high-energy diode-pumped Yb:KYW multipass amplifier.
We report a diode-pumped Yb:KYW amplifier delivering up to 27 mJ pulses at a repetition rate of 100 Hz and a spectral bandwidth of 5.5 nm, centered at around 1030 nm. The system is based on a double-head multipass amplifier configuration where the pump thermal load is distributed over two relatively thin laser crystals, which permits a sufficiently large number of passes with minimal passive lo...
متن کاملA High Efficiency Doherty Amplifier with Digital Predistortion for WiMAX
The Doherty amplifier architecture is a well known technique offering the potential to improve transmitter efficiency especially for signal protocols that exhibit high peak-toaverage power ratios. Although the Doherty approach has significant efficiency advantages, it generally must be augmented with some form of correction or linearity enhancement in the full transmitter design. Wireless infra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Industry Applications
سال: 2007
ISSN: 0913-6339,1348-8163
DOI: 10.1541/ieejias.127.9