A Fundamental Study of Dry Gravity Concentration Method Using Fluidized Bed

Experimental Study of Coating in a Bottom Sprayed Fluidized Bed

Several investigations have been devoted towards understanding the coating process in fluidized beds. Most of these studies focused on spraying liquid droplets over the bed. However, due to the complexity of these systems, more investigations are still required to quantify the effect of operating conditions on the coating criteria. The present work aims at fundamentally understanding and pr...

Control of a Fluidized Bed Polyethylene Reactor

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

Foam Control Using a Fluidized Bed

Numerical study of heat transfer in fluidized bed dryers by volume of fluid ‎method

The purpose of this study is numerical modeling of temperature variation of phases in a two phase regime in fluidized bed dryers including particles belonging to Group D of geldart classification. The mass transfer between phases is not taken into consideration in this modeling which has been assumed in three- dimensional, unsteady, and two-phase regime.To verify the modeling we consider the do...

Chebyshev super spectral viscosity method for a fluidized bed model

A Chebyshev super spectral viscosity method and operator splitting are used to solve a hyperbolic system of conservation laws with a source term modeling a fluidized bed. The fluidized bed displays a slugging behavior which corresponds to shocks in the solution. A modified Gegenbauer postprocessing procedure is used to obtain a solution which is free of oscillations caused by the Gibbs–Wilbraha...