A Fatigue Crack Initiation Model and The Life Estimation under Random Loading by Montecarlo Method
نویسندگان
چکیده
منابع مشابه
Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملSide Effects of Shot Peening on Fatigue Crack Initiation Life
Shot peening beneficial effects on fatigue life of mechanical components are well known. However, there are some reports in the literature that indicate inappropriate shot peening parameters tend to reduce the fatigue life. It is therefore, the purpose of this study to find a logical quantitative justification for these observations. Using finite element method, a dynamic elastic-plastic simula...
متن کاملEffect of the Loading Spectrum and History Length on Fatigue Life Distribution under Random Loading
One major source of error commonly encountered in determining the fatigue life of a given element arises from the loads involved, which are usually of random nature. As a rule, resistance analyses, carried out by simulation or tests, are done by using a loading history accounting for the real loads involved that is repeated indefinitely until failure is encountered. The result is one of the man...
متن کاملFatigue crack growth characteristics of Fe and Ni under cyclic loading using a quasi-continuum method
A quasi-continuum (QC) method based on the embedded atom method (EAM) potential was employed to investigate the fatigue crack growth and expansion characteristics of single-crystal Fe and Ni under cyclic loading modes I and II. In particular, the crack growth and expansion characteristics of Fe and Ni under cyclic loading were evaluated in terms of atomic stress fields and force–distance curves...
متن کاملModelling Mode I Crack Initiation in Composites under Fatigue Loading Using Interface Elements
Modelling quasi-static crack growth with interface elements is a widely accepted technique [1-2]. Interface elements are inserted into the finite element mesh along possible crack paths. The interface elements are characterised by a traction-displacement curve. When a specific maximum stress is reached, the interface element undergoes a softening process until the critical fracture energy has b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Naval Architects of Japan
سال: 1985
ISSN: 1884-2070,0514-8499
DOI: 10.2534/jjasnaoe1968.1985.158_552