A dynamic model for current-based nozzle condition monitoring in fused deposition modelling
نویسندگان
چکیده
منابع مشابه
A Stochastic Model for Indirect Condition Monitoring Using Proportional Covariate Model
This paper introduces a model to make decision on the maintenance of a mechanical component subject to condition monitoring. A stochastic model is used to determine what maintenance action should be taken at a monitoring check and the follow up inspection times. The condition of component has a stochastic relation with measurements. A new state space model is developed and used, to predict the ...
متن کاملTesting of Materials for Rapid Prototyping Fused Deposition Modelling Technology
Paper presents knowledge about types of test in area of materials properties of selected methods of rapid prototyping technologies. In today used rapid prototyping technologies for production of models and final parts are used materials in initial state as solid, liquid or powder material structure. In solid state are used various forms such as pellets, wire or laminates. Basic range materials ...
متن کاملFinite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
متن کاملDynamic Mechanical Properties of ABS Material Processed by Fused Deposition Modelling
This paper presents a study of dynamic mechanical properties of Fused Deposition Modelling (FDM) rapid prototyping processed material Acrylonitrile butadiene styrene (ABS). It involves the measurement of modulus and damping properties of the material as it is deformed under periodic stress. In this study, frequency sweep is performed in DMA 2980 equipment to determine modulus, damping and visco...
متن کاملStudy of Dynamic Mechanical Properties of Fused Deposition Modelling Processed Ultem Material
Fused Deposition Modelling (FDM), a renowned Rapid Prototyping (RP) process, has been successfully implemented in several industries to fabricate concept models and prototypes for rapid manufacturing. This study furnishes terse notes about the material damping properties of FDM made ULTEM samples considering the effect of FDM process parameters. Dynamic Mechanical Analysis (DMA) is carried out ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Additive Manufacturing
سال: 2019
ISSN: 2363-9512,2363-9520
DOI: 10.1007/s40964-019-00089-3