A Dual-Core Surface Plasmon Resonance-Based Photonic Crystal Fiber Sensor for Simultaneously Measuring the Refractive Index and Temperature
نویسندگان
چکیده
In this correspondence, a new photonic crystal fiber biosensor structure on the basis of surface plasmon resonance is proposed for measurement refractive index (RI) and TSM temperature simultaneously. design, central external are coated with thin gold film. A hole adjacent to inner film filled temperature-sensitive material (TSM). With implementation internal coatings along TSM, achieves RI two disjoint wavelength coverage. Numerical simulations calculation results illustrate that average sensitivity structure, respectively, 7080 nm/RIU 3.36 nm/°C coverage from 1.36 1.41 0 60 °C. Moreover, benefiting realization different regions in sensing, it believed will have range applications fields medical diagnostics environmental assessments.
منابع مشابه
Physical modeling of a refractive index photonic crystal fiber based on surface plasmon resonance
This article has no abstract.
متن کاملFiber Optic Surface Plasmon Resonance based Refractive Index Sensor
In the present study, a surface plasmon resonance (SPR) based fiber optic sensor is proposed. The extreme sensitivity of SPR modes on the surrounding refractive index has been exploited to make the sensor. The optical fiber is coated with gold film which supports the propagation of surface plasmons. The SPR dip in the transmission spectrum is observed and its shift with varying refractive indic...
متن کاملHigh Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice
A refractive index sensor based on dual-core photonic crystal fiber (PCF) with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM). Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33-1.41. Numerical simulation resu...
متن کاملFabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملA surface-plasmon-resonance sensor based on photonic-crystal-fiber with large size microfluidic channels
A surface-plasmon-resonance (SPR) sensor based on photonic-crystal-fiber (PCF) with large size microfluidic channels is proposed. The size of the microfluidic channels with gold coating can be enlarged by reducing the number of the holes in the second layer, so the structure of the PCF is simple and easy to manufacture. It is propitious for metal coating and infiltration of microfluidic. The co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Crystals
سال: 2023
ISSN: ['2073-4352']
DOI: https://doi.org/10.3390/cryst13060972