A dramatic reduction in the sintering temperature of the refractory sodium ???-alumina solid electrolyte <i>via</i> cold sintering
نویسندگان
چکیده
The refractory solid electrolyte, sodium beta alumina, is cold sintered at 375 °C which over 1000 lower than conventional sintering. A relative density above 90% and an ionic conductivity of 10 ?3 S cm ?1 (300 °C) obtained.
منابع مشابه
Low-Temperature Sintering of Alumina with Liquid-Forming Additives
Simultaneous application of colloidal processing and liquidforming additives to alumina resulted in a sintered density of >99% in 1 h at a temperature as low as 1070°C for a commercial high-purity alumina powder at a total dopant level of 2 mol%. The additives were 0.9% CuO + 0.9% TiOz + 0.1% B 2 0 3 + 0.1% MgO. At higher temperatures or after prolonged sintering, the doped alumina ceramic deve...
متن کاملthe effect of consciousness raising (c-r) on the reduction of translational errors: a case study
در دوره های آموزش ترجمه استادان بیشتر سعی دارند دانشجویان را با انواع متون آشنا سازند، درحالی که کمتر به خطاهای مکرر آنان در متن ترجمه شده می پردازند. اهمیت تحقیق حاضر مبنی بر ارتکاب مکرر خطاهای ترجمانی حتی بعد از گذراندن دوره های تخصصی ترجمه از سوی دانشجویان است. هدف از آن تاکید بر خطاهای رایج میان دانشجویان مترجمی و کاهش این خطاها با افزایش آگاهی و هوشیاری دانشجویان از بروز آنها است.از آنجا ک...
15 صفحه اولan investigation of the types of text reduction in subtitling: a case study of the persian film gilaneh with english subtitles
چکیده ندارد.
15 صفحه اولSintering Aids in Powder Metallurgy THE ROLE OF THE PLATINUM METALS IN THE ACTIVATED SINTERING OF REFRACTORY METALS
When a metallic powder is subjected to a suffkiently high pressure a certain amount of adhesion takes place between individual particles. If this compact i s then sintered the bond is improved by diflusion and intergranular grain growth. The earliest known platinum objects were fabricated by such a powder metallurgical process, and when European scientists first addressed the problem of manufac...
متن کاملIncreasing of tetragonal zirconia formation in the reaction sintering of alumina-zircon
In this study it was tried to investigate on the effective parameters of the formation and increasing tetragonal zirconia phase in reaction sintering of alumina and zircon. In this way, alumina and zircon powders were mixed by the ratio of 85 to 15 wt.% and sintered at different conditions. Sintering temperature (1500-1650˚C), furnace type (conventional and microwave) and the milling time of r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of materials chemistry. A, Materials for energy and sustainability
سال: 2021
ISSN: ['2050-7488', '2050-7496']
DOI: https://doi.org/10.1039/d1ta05933e