A direct borohydride—Acid peroxide fuel cell
نویسندگان
چکیده
منابع مشابه
A direct borohydride—Acid peroxide fuel cell
A fuel cell operating with aqueous sodium borohydride and hydrogen peroxide streams, with one, two and four cells (electrode area 64, 128 nd 256 cm2) connected in a bipolar mode in a filterpress flow cell is reported. The oxidation of borohydride ion was carried out on Au/C particles upported on a carbon felt electrode while the reduction of hydrogen peroxide was carried out on carbon supported...
متن کاملA Self-Supported Direct Borohydride-Hydrogen Peroxide Fuel Cell System
A self-supported direct borohydride-hydrogen peroxide fuel cell system with internal manifolds and an auxiliary control unit is reported. The system, while operating under ambient conditions, delivers a peak power of 40 W with about 2 W to run the auxiliary control unit. A critical cause and effect analysis, on the data for single cells and stack, suggests the optimum concentrations of fuel and...
متن کاملA direct borohydride–peroxide fuel cell using a Pd/Ir alloy coated microfibrous carbon cathode
Article history: Received 16 July 2008 Received in revised form 1 August 2008 Accepted 6 August 2008 Available online xxxx
متن کاملA direct methanolehydrogen peroxide fuel cell with a Prussian Blue cathode
In this work, a direct methanolehydrogen peroxide fuel cell is developed and tested. Theoretically, it is shown that the use of hydrogen peroxide in a direct methanol fuel cell (DMFC) not only increases the cell's voltage from 1.21 V to 1.76 V, but also reduces the activation loss of the reduction reaction as a result of two-electron transfer. Experimentally, it is demonstrated that the fuel ce...
متن کاملFunctionalized and Electrospun Polymeric Materials as High-Performance Membranes for Direct Methanol Fuel Cell: A Review
Proton exchange membranes (PEM) for a direct methanol fuel cell (DMFC) have main drawbacks which are methanol permeability, reduced proton conductivity and the cost of the membrane. This paper reviews different polymeric materials such as fluorinated, non-fluorinated, acid-base complex, and composite membranes for DMFC. Currently, nonfluorinated membranes gain a lot of atte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Power Sources
سال: 2007
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2006.10.069