A Determination of the Corrosion and Microstructure Properties of AlSi10Mg Material Produced by Different Direct Metal Laser Sintering (DMLS) Process Parameters
نویسندگان
چکیده
Additive Manufacturing (AM) has been developing with increasing interest in recent years. The development this technology will accelerate the increase material, process, and product quality. It is therefore essential to investigate these shortcomings of additive manufacturing products. In study, microstructure corrosion properties material (AlSi10Mg) were investigated by changing production parameters Direct Metal Laser Sintering (DMLS) process. Energy density was considered parameter selection. corrosion, topography, mechanical DMLS-AlSi10Mg detail, depending on process parameters. determined that resistance hardness are directly related porosity level structure.
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولTensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling
A statistical approach for the characterization of Additive Manufacturing (AM) processes is presented in this paper. Design of Experiments (DOE) and ANalysis of VAriance (ANOVA), both based on Nested Effects Modeling (NEM) technique, are adopted to assess the effect of different laser exposure strategies on physical and mechanical properties of AlSi10Mg parts produced by Direct Metal Laser Sint...
متن کاملComparison of Mechanical, Metallurgical Properties of 17-4PH Stainless Steel between Direct Metal Laser Sintering (DMLS) and Traditional Manufacturing Methods
The purpose of this research was to analyze and compare the mechanical properties of parts made using both Direct Metal Laser Sintering (DMLS) and traditional manufacturing methods like casting or forging. Previous research in DMLS was conducted using various materials, but there has been very little done for 17-4PH stainless steel. All the samples used for testing were conducted using the EOSI...
متن کاملarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولOn the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
The aim of this review is to analyze and to summarize the state of the art of the processing of aluminum alloys, and in particular of the AlSi10Mg alloy, obtained by means of the Additive Manufacturing (AM) technique known as Selective Laser Melting (SLM). This process is gaining interest worldwide, thanks to the possibility of obtaining a freeform fabrication coupled with high mechanical prope...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bitlis Eren üniversitesi fen bilimleri dergisi
سال: 2022
ISSN: ['2147-3188', '2147-3129']
DOI: https://doi.org/10.17798/bitlisfen.1102823