A Design of Similar High-gain and Dual-band Frequency/Polarization Reconfigurable Antenna for ISM Band Applications

Design, Simulation and implementation of active dual-band dipole antenna using a series stub

In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...

Modified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band

The U-slot micro-strip patch antennas were originally developed for bandwidth broadening applications. This study presents a transmission line feed to modify the U-slot stacked rectangular micro-strip patch antenna for Ultra-Wide Band (UWB) communications. The modified antenna has a U-cut loaded with parallel slits and corner slots and is printed on a dielectric substrate of FR4 with relative p...

High Gain Planar Antenna Structures for Ka-band Applications

Dual Band Slotted Patch Antenna for On/Off-body Communication

Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...

Dual-Band Split-Ring Antenna Design for WLAN Applications

A dual-band microstrip antenna based on split-ring elements is introduced for WLAN (2.4/5.2 GHz) applications. The proposed split-ring antenna (SRA) has a compact novel design which provides about 2% impedance-bandwidth without a need for additional matching network. Analysis and design of the proposed microstrip antenna is carried out by means of full-wave simulators based on the finite-elemen...