A D-Band Integrated Signal Source Based on SiGe 0.18μm BiCMOS Technology
نویسندگان
چکیده
منابع مشابه
A Ku-Band Low-Phase-Noise Wide-Tuning-Range VCO in SiGe BiCMOS Technology
—In this paper, design and fabrication of a Ku-band voltage-controlled oscillator (VCO) using commercially available 0.18 μm SiGe BiCMOS technology is presented. To achieve the low phase noise, the VCO employs a gm-boosted configuration which is a combination of cross coupled VCO and balanced Colpitts VCO, and the VCO simultaneously achieves wide tuning range. The tested results show that the ...
متن کاملA Q-Band Frequency Synthesizer in 0.13 μm SiGe BiCMOS
In this paper, a 42GHz frequency synthesizer fabricated with 0.13μm SiGe BiCMOS technology is presented, which consists of an integer-N fourth-order type-II phase locked loop (PLL) with a LC tank VCO and a frequency doubler. The core PLL has three-stage current mode logic (CML) and five stage true single phase clock (TSPC) logic in the frequency divider. Meanwhile, a novel balanced common-base ...
متن کاملA 6-b 1Gsample/s SiGe BiCMOS A/D Converter
Very high-speed A/D converters are widely used in hard disk read channels, high-speed Ethernet transceivers and satellite receivers. For such applications a resolution of 6-b at a sampling speed of 1GS/s or higher is usually required. In literature some CMOS implementations are reported, featuring a sampling speed between 0.8 and 1.6-GS/s and power consumption between 300 and 500mW [1,2,3,4]. T...
متن کاملChoosing RF CMOS or SiGe BiCMOS in mixed-signal design
Deciding what technology to choose for fast-moving targets is not trivial, especially in the commercial space where the price, time to market, and the performance of the chip can make or break a product, and sometimes the company. This article attempts to analyze these issues from the perspective of a fabless design house. It discusses key issues that need to be considered when deciding what te...
متن کاملSiGe BiCMOS Baseline Technology for More than Moore Functional Diversification
“More Than Moore” functional diversification by combining different technologies is enlarging the spectrum for embedded system applications. In this paper we focus on the monolithic integration approach of optical components into the front-endoff-line (FEOL) to combine electronics and photonics (Si Photonics), and of MEMS (microelectro-mechanical systems) into the back-end-offline (BEOL) of SiG...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of electromagnetic engineering and science
سال: 2015
ISSN: 2234-8409
DOI: 10.5515/jkiees.2015.15.4.232