A criterion for predicting delamination growth in composite laminates

نویسندگان

چکیده

To develop a simplified and physically sound delamination-failure criterion, this paper reports joint experimental numerical study in which out-of-plane quasi-static indentations with different indentation forces were applied to the centre of fully clamped rectangular carbon fibre-reinforced polymer (CFRP) laminates. The results show that two basic micro-delamination growth modes, are separately dominated by opening sliding microcracks, can be distinguished according fracture morphologies delaminations along 0° fibre direction. Both driven shear stress σ13, corresponding delamination failure threshold is strength S13. Based on these results, concise Hashin-type delamination-propagation criterion containing only single component parameter proposed, which, incorporating it into finite element model, directions multidirectional CFRP laminates precisely predicted; prediction error less than 10 %.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Stress intensity factors as the fracture parameters for delamination crack growth in composite laminates

A ``mutual integral'' approach is used to calculate the mixed-mode stress intensity factors for a free-edge delamination crack in a laminate under tensile loading conditions. This ``mutual integral'' approach, for generalized plane strain conditions, is based on the application of the path-independent J integral to a linear combination of three solutions: one, the problem of the laminate to be ...

متن کامل

Comprehensively simulating the mixed-mode progressive delamination in composite laminates

Gao, Zhenyuan MSAA, Purdue University, May 2015. Comprehensively Simulating the Mixed-Mode Progressive Delamination in Composite Laminates. Major Professor: Wenbin Yu. Delamination, or interlaminar debonding, is a commonly observed failure mechanism in composite laminates. It is of great significance to comprehensively simulate the mixed-mode progressive delamination in composite structures bec...

متن کامل

A new cohesive model for simulating delamination propagation in composite laminates under transverse loads

A new cohesive model for simulating delamination propagation in composite laminates under transverse loads. Running title: A new cohesive model for simulating delamination propagation in composite laminates 2 Abstract In this paper, we propose a new cohesive model to stably and accurately simulate the delamination propagations in composite laminates under quasi-static and low-velocity impact tr...

متن کامل

Compressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination

The buckling and postbuckling behaviors of a composite beam with single delamination are investigated. A three-dimensional finite element model using the commercial code ANSYS is employed for this purpose. The finite elements analyses have been performed using a linear buckling model based on the solution of the eigenvalues problem, and a non-linear one based on an incremental-iterative method....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials & Design

سال: 2022

ISSN: ['1873-4197', '0264-1275']

DOI: https://doi.org/10.1016/j.matdes.2022.111160