A Continuous Fixed Bed Adsorption Process for Fez City Urban Wastewater Using Almond Shell Powder: Experimental and Optimization Study
نویسندگان
چکیده
This study deals with the valorization of a biomaterial, almond shell, for treatment urban effluents city Fez by fixed bed column adsorption process. A parametric analysis process is carried out conditions such as particle size, pH and height adsorbent to evaluate optimal removal percent obtain an capacity load. Characterization prior continuous was X-ray diffraction, Fourier-transform infrared spectrometry scanning electron microscopy. The seems be influenced certain parameters, size biomaterial used, pH. results suggest that this can used less expensive, available, biodegradable very effective eliminate load waters on small scale why not large replace chemicals in recover waste shell. parameters measured reached maximum values varying between 82% COD, 79% EC 71% nitrite under well-defined operating conditions, 0.063 mm, 7 cm 6.5.
منابع مشابه
Adsorption Process for Wastewater Treatment by using Coconut Shell
Adsorption of heavy metal on the solid surfaces is an important technique to remove them from the industrial wastewaters. The purpose of the present study is to evaluate the ability of agro-waste material coconut shell to remove Cr (VI) from wastewater. The extant of removal was found to be dependent on pH, contact time, adsorbent dose, concentration of metal and particle size. The adsorption f...
متن کاملFIXED-BED ADSORPTION OF CONGO RED ONTO TEA WASTE IN THE PRESENCE OF Fe2O3 NANOPARTICLES: AN EXPERIMENTAL AND MODELING STUDY
In this study, tea waste (TW) is employed for the removal of Congo red (CR) from aqueous solutions in a fixed-bed column at 30 °C. The breakthrough curves of the adsorption process of CR on TW at three different flow rates are determined. The results revealed that the breakthrough curves were dependent on flow rates in a manner in which a lower flow rate was in favor of the CR adsorption in the...
متن کاملExperimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column
In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...
متن کاملAn Experimental Study of Adsorption Breakthrough Curves for CO2/CH4 Separation in a Fixed Bed of Nanoporous Shaped Copper Trimesate Metal Organic Framework
Copper trimesate (Cu-BTC) MOF has been pointed out as a promising adsorbent for separating carbon dioxide from methane. However, MOF’s need to be shaped prior to their use in packed bed adsorbers in order to reduce pressure drop; on the other hand, the production of mechanically resistant shaped bodies reduces their adsorption performance. In this work, Cu-BTC tablets provided by BASF are evalu...
متن کاملExperimental Study of Fluidized Bed Agglomeration of Acerola Powder
The aim of this work was to study the main effects of acerola powder on fluidized bed agglomeration. A 2 fractional factoring design was used to evaluate the main operating conditions (fluidizing air temperature, fluidizing air velocity, atomizing air flow and height of nozzle in the bed). The mechanical and physicochemical product changes were determined by analysis of particle diameter, moist...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Catalysts
سال: 2022
ISSN: ['2073-4344']
DOI: https://doi.org/10.3390/catal12121535