A Comprehensive Review on Catalytic Oxidative Desulfurization of Liquid Fuel Oil
نویسندگان
چکیده
منابع مشابه
Oxidative desulfurization of fuel oil by pyridinium-based ionic liquids.
In this work, an N-butyl-pyridinium-based ionic liquid [BPy]BF(4) was prepared. The effect of extraction desulfurization on model oil with thiophene and dibenzothiophene (DBT) was investigated. Ionic liquids and hydrogen peroxide (30%) were tested in extraction-oxidation desulfurization of model oil. The results show that the ionic liquid [BPy]BF(4) has a better desulfurization effect. The best...
متن کاملAdvances in Desulfurization Research of Liquid Fuel
The new requirements for sulfur content in liquid fuels demand the use of novel deep desulfurization processes. 4-methyldibenzothiophene, 4,6dimethyldibenzothiophene and their alkyl-substituted derivatives are the key substances that need to be separated from diesel fuel and fuel oil. These compounds require higher hydrogen consumption in the hydrodesulfurization process and the use of addition...
متن کاملبوزدایی از fuel oil deodorization of fuel oil
مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در fuel oil عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی fuel oil تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...
15 صفحه اولCatalytic Oxidative-Extractive Deep Desulfurization of Diesel Fuel by N-methyl-2-pyrrolidone-Based Protic Acidic Ionic Liquids (PAILs)
Inexpensive and low-viscosity Protic Acidic Ionic Liquids (PAILs) of N-metheyl-2-pyrrolidone formate, acetate, and propionate abbreviated as [Hnmp][HCOO], [Hnmp][CH3COO] and [Hnmp][CH3CH2COO] respectively, were prepared and characterized by FT-IR and H-NMR. Deep oxidative and extractive desulfurization of a simulated oil and a real diesel containing 1000 ppm...
متن کاملOxidative desulfurization of light fuel oil by using hydrogen peroxide in the presence of acetic acid catalyst
Hydrogen peroxide as an oxidant agent was used for desulfurization of a petroleum hydrocarbon fraction (C10-C22) with boiling range of 175-375 ℃, (light fuel oil) in the presence of acetic acid as catalyst. The oxidation was performed in an ultrasonic bath. It is found that increasing the amount of hydrogen peroxide lead to increase the oxidation rate and so desulfurizatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Catalysts
سال: 2019
ISSN: 2073-4344
DOI: 10.3390/catal9030229