A Composite Membrane of Caesium Salt of Heteropolyacids/Quaternary Diazabicyclo-Octane Polysulfone with Poly (Tetrafluoroethylene) for Intermediate Temperature Fuel Cells
نویسندگان
چکیده
منابع مشابه
A Composite Membrane of Caesium Salt of Heteropolyacids/Quaternary Diazabicyclo-Octane Polysulfone with Poly (Tetrafluoroethylene) for Intermediate Temperature Fuel Cells
Inorganic-organic composite electrolyte membranes were fabricated from CsXH3-XPMo12O40 (CsPOMo) and quaternary diazabicyclo-octane polysulfone (QDPSU) using a polytetrafluoroethylene (PTFE) porous matrix for the application of intermediate temperature fuel cells. The CsPOMo/QDPSU/PTFE composite membrane was made proton conducting by using a relatively low phosphoric acid loading, which benefits...
متن کاملComposite Electrolytes and electrodes for Intermediate Temperature Hybrid Fuel Cells
Moving away from conventional solid oxide electrolytes, hybrid fuel cells based on composite electrolytes (a solid oxide electrolyte and a molten alkaline carbonate phase) exhibit promising performance due to the high electrolyte conductivity within the so-called intermediate temperature ranges (400-600 C). These electrolytes are a blend of those traditionally used in Solid Oxide and Molten Car...
متن کاملSulfonated Polysulfone/POSS Nanofiber Composite Membranes for PEM Fuel Cells
D Sulfonated Polysulfone/POSS Nanofiber Composite Membranes for PEM Fuel Cells Jonghyun Choi,* Kyung Min Lee, Ryszard Wycisk,** Peter N. Pintauro,** and Patrick T. Mather Department of Chemical Engineering, Case Western Reserve University, Cleveland, Ohio 44106, USA Department of Chemical and Biomolecular Engineering, Vanderbilt University, Nashville, Tennessee 37235, USA Syracuse Biomaterials ...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملla0.6sr0.4co0.2fe0.8o3 perovskite cathode for intermediate temperature solid oxide fuel cells: a comparative study
in this study the characteristics of two different kinds of la0.6sr0.4co0.2fe0.8o3 (lscf) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from fuel cell materials co. (fcm co., usa), were compared. the co-precipitated powder was prepared by using ammonium carbonate as precipitant with a nh4+/no3- molar ratio of 2 and calcination at 1000c for 1 h....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Membranes
سال: 2012
ISSN: 2077-0375
DOI: 10.3390/membranes2030384