A Comparison Between Semisolid Casting Methods for Aluminium Alloys

Continuous Roll Casting of Aluminium Alloys– Casting Parameters Analysis

The continuous roll casting process (CRC), consisting of continuous strip casting between rolls, is now well known. It was introduced by the SCAL Company (Pechiney Ugine Kuhlmann Group) 60 years ago 1 . The process consists of solidifying aluminum or aluminum alloys between the water-cooled rolls of a duo rolling mill. From the moment when solidification is completed to the moment when the stri...

Macrosegregation in direct-chill casting of aluminium alloys

Modelling of Precipitation Hardening in Casting Aluminium Alloys

Precipitation hardening, because it involves the hardening of the material over a prolonged time, is also called age hardening, or ageing. By the appropriate heat treatment of precipitation hardening, the strength or hardness of some heat-treatable aluminium alloys can be enhanced by the formation of nano-meter sized second-phase precipitated particles within the original phase matrix. The fine...

Semisolid casting with ultrasonically melt-treated billets of Al-7mass%Si alloys

The demand for high performance cast aluminum alloy components is often disturbed by increasing impurity elements, such as iron accumulated from recycled scraps. It is strongly required that coarse plate-like iron compound of β-Al5FeSi turns into harmless form without the need for applying refining additives or expensive virgin ingots. The microstructural modification of Al-7mass%Si alloy bille...

modification of the naturally-pressurized running system for casting aluminium alloys

in this research, the effect of friction between the liquid metal and the sand mould wall and the effect of passage of liquid through a vertical bend and through a ceramic filter on the fluid flow and the melt velocity has been studied by measuring the velocity of the melt and direct observation of the liquid flow through the different parts of a naturally-pressurized running system. the fricti...