A comparison among different automotive shredder residue treatment processes
نویسندگان
چکیده
منابع مشابه
Mass balance for POPs in a real scale fluidized bed combustor co-incinerating automotive shredder residue.
The European directive 2000/53/EC implies a "reuse and recovery" rate for end-of-life vehicles (ELVs) of 95% to be reached by the year 2015. One of the options to increase the actual average European "reuse and recovery" rate of approximately 78% (EU 15, 2008) is incineration of automotive shredder residue (ASR) with energy-recovery. The mass balance and the congener fingerprints for PCDD/Fs, d...
متن کاملEnergy Recovery from Automotive Shredder Residue through Co-combustion with Municipal Solid Waste
This project was commissioned by the Association of Plastics Manufacturers in Europe (APME) and the American Plastics Council (APC) to evaluate the operational and environmental impacts associated with the co-combustion of automotive shredder residue (ASR) with municipal solid waste (MSW) in a modem, commercial waste-to-energy plant. This paper describes the shredding and combustion facilities ...
متن کاملPyrolysis of automotive shredder residue light fraction: maximization of the tar yield using design of experiment
The general aim of this study is the valorisation of Automotive Shredder Residue (ASR) via pyrolysis. Tar, the condensable gases obtained in the pyrolysis process, is an interesting alternative fuel. Thus, the pyrolysis process was investigated in order to maximize the tar yield. The design of experiment approach was used to plan a series of experiments and to identify which operating variables...
متن کاملPretreatment of automobile shredder residue (ASR) for fuel utilization.
Automobile shredder residue (ASR) was pretreated to improve its quality for fuel utilization. Composition analysis revealed that ASR components could be classified into four groups: (1) urethane and textile-light fraction and combustibles containing low levels of ash and Cl; (2) plastics and rubber-light or heavy fraction and combustibles containing high levels of Cl; (3) metals and electrical ...
متن کاملDifferent Approach to Anaerobic Sewage Treatment Processes
INTRODUCTION Anaerobic technology have been successful applied for industrial waste water treatment. High reaction rate per unit volume by retaining the biomass in the reactor independently of the incoming waste water flow and concentration. Often high volumetric loading rates in the order of 10 to 40 kg COD/m.d are used. High rate anaerobic biological reactors may be classified into three broa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Life Cycle Assessment
سال: 2010
ISSN: 0948-3349,1614-7502
DOI: 10.1007/s11367-010-0222-1