A COMPACT MICROSTRIP SQUARE-RING SLOT ANTENNA FOR UWB APPLICATIONS
نویسندگان
چکیده
منابع مشابه
A compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کاملCompact CPW-fed Circular Patch Antenna for UWB Applications
In this paper, a novel CPW-fed antenna is presented for UWB applications. The antenna mainly comprises of a simple circular patch and a modified ground plane. The inclusion of two novel symmetrical rectangular slots with inner area of 3×2.8 mm2 to the top corners of the antenna creates a new path for the current and consequently leads to the bandwidth enhancement. A rectangular stub is also ado...
متن کاملA Compact Annular Ring Microstrip Antenna for WSN Applications
A compact annular ring microstrip antenna was proposed for a wireless sensor network (WSN) application in the 2.4 GHz band. In this paper the major considerations of the conformal antenna design were the compact size and the impact on antenna's performance of a steel installation base. By using a chip resistor of large resistance (120 Ω) the antenna size was reduced to 38% of that a conventiona...
متن کاملA Compact Monopole CPW-Fed Band Notch Square- ring Antenna for UWB Applications
This paper presents the design of compact CPW-fed band notched UWB square ring antenna. The main objective of this proposed research work is to reduce the size of antenna and avoid interference between UWB and WLAN application at 5.5GHz. The antenna consists of a square-ring metal patch and 50Ω coplanar waveguide fed. The structure of the antenna is miniaturized by optimizing its square ring pr...
متن کاملCompact Microstrip-Fed Square Loop Antenna for DTV Applications
A design method for a compact square loop antenna fed by a microstrip (MS) line for indoor digital television (DTV) applications is proposed. The proposed antenna consists of a square loop, circular sectors, and an MS line. The square loop combined with circular sectors is printed on one side of a substrate, and a 75 ohm MS line is printed on the other side. The circular sectors are used as a w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research
سال: 2007
ISSN: 1559-8985
DOI: 10.2528/pier06082901