A compact 3-dB coupler with microstrip cells
نویسندگان
چکیده
منابع مشابه
A Miniaturized 3-dB Microstrip TRD Coupled-Line Rat-Race Coupler with Harmonics Suppression
A miniaturized microstrip rat-race coupler with harmonics suppression is proposed by using shorted trans-directional (TRD) coupled lines. The shorted TRD coupled lines consist of a set of capacitor-loaded λ/4 coupled microstrip lines with two shorts, which are used to replace the 3λ/4 uniform transmission-line section (UTLS) in the traditional 3λ/2 ring coupler for miniaturization. To attain pe...
متن کاملDesign of a Novel 3 Db Microstrip Backward Wave Coupler Using Defected Ground Structure
In this paper an edge coupled microstrip coupler with defected ground structure is presented. A normally 7 dB coupler designed on Alumina substrate is converted into a 3 dB coupler by cutting single rectangular slot in the ground plane encompassing the two transmission lines. Other properties of backward wave coupler remain the same, except for a tighter coupling. With this method of design opt...
متن کاملMicrostrip Coupler with High Isolation
A method to improve the isolation of the microstrip coupler is presented. The pattern of the coupler is modified for phase velocity compensation which results in high isolation. Using this procedure, a 15 dB coupler is designed and fabricated at 0.9 GHz. A high isolation of 63.3 dB is measured. The validity of the design concept is verified by simulations and measurements.
متن کاملMiniaturization of Broadband 3-db Branch- Line Coupler
In this letter, a new miniaturized broadband 3-dB branchline coupler at the center frequency of 880 MHz is proposed. The proposed coupler is designed by means of integrated miniaturization method, which consists of shunt capacitors, fractal geometry and equivalent miniaturized stubs, to achieve 82% size reduction compared with the referenced coupler. The return loss and isolation are both under...
متن کاملNovel Broadband 3-dB Directional Coupler Design Method
─ A novel broadband 3-dB directional coupler design method utilizing HFSS and realization are given in this paper. It is realized in stripline, showing great agreement with the simulation and design format. The unique property of this design method is that it unnecessitates both a feedback from the realization for broadbanding and an additional smoothing of transition between coupled sections o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2021
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/1730/1/012103