A cobalt-free bismuth ferrite-based cathode for intermediate temperature solid oxide fuel cells
نویسندگان
چکیده
منابع مشابه
La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملla0.6sr0.4co0.2fe0.8o3 perovskite cathode for intermediate temperature solid oxide fuel cells: a comparative study
in this study the characteristics of two different kinds of la0.6sr0.4co0.2fe0.8o3 (lscf) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from fuel cell materials co. (fcm co., usa), were compared. the co-precipitated powder was prepared by using ammonium carbonate as precipitant with a nh4+/no3- molar ratio of 2 and calcination at 1000c for 1 h....
متن کاملBismuth oxide-based solid electrolytes for fuel cells
During the last three decades, a large number of investigations has been reported pertaining to the science and technology of solid oxide fuel cells (SOFCs) based mainly on the yttria-stabilized zirconia (YSZ) electrolyte. Because of the problems associated with the high temperature of operation ( ,-~ 1 000 ~ of the YSZ-based cells, there has been a substantial effort to develop alternative ele...
متن کاملStudy on Sm1.8Ce0.2CuO4–Ce0.9Gd0.1O1.95 composite cathode materials for intermediate temperature solid oxide fuel cell
Sm1.8Ce0.2CuO4–xCe0.9Gd0.1O1.95 (SCC–xCGO, x = 0–12 vol.%) composite cathodes supported on Ce0.9Gd0.1O1.95 (CGO) electrolyte are studied for applications in IT-SOFCs. Results show that Sm1.8Ce0.2CuO4 material is chemically compatible with Ce0.9Gd0.1O1.95 at 1000 °C. The composite electrode exhibits optimum microstructure and forms good contact with the electrolyte after sintering at 1000 °C for...
متن کاملAdvanced BaZrO3-BaCeO3 Based Proton Conductors Used for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)
..................................................................................................................................... i Supplements and Contribution statement ............................................................................ iii Acknowledgements ................................................................................................................... v Table of
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electrochemistry Communications
سال: 2021
ISSN: 1388-2481
DOI: 10.1016/j.elecom.2021.106978