A Boiler Combustion Control System with Combustion Ratio Optimisation and Soft Measurements
نویسندگان
چکیده
منابع مشابه
Analysis of Combustion Mechanism and Combustion Optimization of a 300mw Pulverized Coal Boiler
Combustion mechanism of a 300 MW pulverized coal boiler is analyzed and the optimization of the performance of the boiler is carried out. The flow field, temperature field, devolatilization, char combustion and CO generation in the boiler furnace under actual condition is obtained by using Fluent. Three methods to improve the efficiency of boiler combustion are proposed based on the pulverized ...
متن کاملTransient combustion control of internal combustion engines
This thesis addresses the problem of combustion control for automotive engines. A method is proposed to complement existing controllers, which use lookup tables based on steady-state operation. During transients, the new control method adjusts fast control variables (ignition or injection time) to compensate for deviations in the cylinder initial conditions from their optimal values due to the ...
متن کاملNew Method for Controlling Combustion in a Grate Boiler
The control of disturbances due to fuel quality variation is important development area in the grate combustion technology. Main challenges in the control of the grate combustion are inhomogeneous fuel, variation in fuel moisture content, non-uniform distribution of fuel on the grate area and high percentage of combustibles in ash. Information on events which occur in the furnace plays an impor...
متن کاملNumerical modeling of biomass combustion in a stoker boiler
Biomass fuel is considered a promising substitute for traditional fossil fuels. Amid a great variety of methods for converting the energy in biomass fuel into usable energy, direct combustion is still the dominant technology employed by industry. Because biomass fuel possess a much wider range of physical and chemical properties than fossil fuel, its combustion behavior is similarly diverse (an...
متن کاملBehavior Responses and Control Modeling Based Cascaded Pid Controller Scheme for Combustion of a Utility Boiler
Abstract – The main objective of the combustion controller in a thermal power plant is to regulate fuel and air in proper ratio to maintain the desired steam pressure at the turbine inlet, irrespective of the changes in steam demand. To achieve a continuous supply of steam at the desired pressure conditions is difficult to cope with inherent time delay, nonlinearity due to uncertainty of the co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement and Control
سال: 2010
ISSN: 0020-2940
DOI: 10.1177/002029401004300403