A 3D Printed Implantable Device for Voiding the Bladder Using Shape Memory Alloy (SMA) Actuators

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A 3D Printed Implantable Device for Voiding the Bladder Using Shape Memory Alloy (SMA) Actuators

Underactive bladder or detrusor underactivity (DU) is defined as a reduction of contraction strength or duration of the bladder wall. Despite the serious healthcare implications of DU, there are limited solutions for affected individuals. A flexible 3D printed implantable device driven by shape memory alloys (SMA) actuators is presented here for the first time to physically contract the bladder...

متن کامل

Shape Memory Alloy (sma) Coil Actuators for Use in Controllable Mechanical Counter-pressure (mcp) Space Suits

Mechanical counter-pressure (MCP) space suits, which apply pressure to the wearer using tight-fitting materials rather than pressurized gas, offer numerous mobility and mass advantages over traditional gas-pressurized suits [1]. However, MCP design challenges related to pressure uniformity, pressure magnitude, and donning/doffing remain unsolved [2]. Previous MCP efforts have focused on passive...

متن کامل

Shape memory alloy actuators and their reliability

We have developed two types of shape memory alloy (SMA) actuator and estimated the long-term reliability of SMA microcoils. A tube type tip articulator consists of 4 sets of SMA microcoil (wire diameter: 0.125 mm, coil diameter: 0.5 mm) for driving source and super elastic alloy (SEA) microcoils (wire diameter: 0.1 mm, coil diameter: 0.5 mm) for bias springs, support plates and flexible outer t...

متن کامل

Wet Shape Memory Alloy Actuators for Active Vasculated Robotic Flesh

− A new type of actuator is presented where Shape Memory Alloy (SMA) wires are embedded within artificial “blood vessels.” Fluid flowing through vessels allows the SMA wires to be rapidly cooled by convection, resulting in greater bandwidth than ordinarily possible. Combinations of electric, fluidic, and thermal inputs can be used to control the contraction/extension of the SMA wires within the...

متن کامل

Shape memory alloy micro-actuators for medical applications

Most of the current ’applications’ of microelectromechanical systems can be found in the sensor field. The development of micro-actuators is severely hindered by the low power-to-volume ratio of most actuator technologies. Most of the presented micromotors also require reduction gearing and suffer from wear or fatigue problems. Shape Memory Alloy (SMA) actuators offer the advantage of extremely...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advanced Science

سال: 2017

ISSN: 2198-3844

DOI: 10.1002/advs.201700143