A 1.8–3.2-GHz Doherty Power Amplifier in Quasi-MMIC Technology
نویسندگان
چکیده
منابع مشابه
A 28-36 GHz Optimized CMOS Distributed Doherty Power Amplifier with A New Wideband Power Divider Structure
Background and Objectives: In this paper, a new design strategy was proposed in order to enhance bandwidth and efficiency of power amplifier. Methods: To realize the introduced design strategy, a power amplifier was designed using TSMC CMOS 0.18um technology for operating in the Ka band, i.e. the frequency range of 26.5-40GHz. To design the power amplifier, first a power divider (PD) with a ver...
متن کاملAn 8.4 GHz SiGe/Si HBT-Based MMIC Power Amplifier
A single-stage X-band MMIC power amplifier incorporating a SiGe/Si power HBT and lumped passive components is reported. The power HBT is characterized by an fmax of 67 GHz and a BVCBO of more than 24 V. The matching circuits were designed for maximum output power using on-chip spiral inductors and SiO MIM capacitors. Continuous wave measurements were made at 8.4 GHz, under class A operation. Th...
متن کاملModified Doherty Power Amplifier for Wider Band
Wireless communication system are developing rapidly, due to which new standards like WIMAX and 4G Long Term Evaluating(LTE) with a purpose of achieving high data rate result in high end applications such as high speed internet, video conferences and broadband width. These applications require mobile base stations at the transmitter as well as at receiver (T/R) to support features like multiple...
متن کاملDesign of a Concurrent Dual-Band 1.8–2.4-GHz GaN-HEMT Doherty Power Amplifier
In this paper, the design, implementation, and experimental results of a high-efciency dual-band GaN-HEMT Doherty power amplier (DPA) are presented. An extensive discussion about the design of the passive structures is presented showing different possible topologies of the dual-band DPA. One of the proposed topologies is used to design a dual-band DPA in hybrid technology for the frequency ba...
متن کاملHigh-Power Inverted Doherty Power Amplifier for Broadband Application
Abstract This paper presents a high-power inverted Doherty power amplifier for broader operational bandwidth. After analyzing two operation modes according to the load modulation of the Doherty power amplifier, the inverted Doherty structure was selected. In the design, the load impedances for optimum broadband characteristics at both the back-off and peak power levels. The Doherty power amplif...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Microwave and Wireless Components Letters
سال: 2019
ISSN: 1531-1309,1558-1764
DOI: 10.1109/lmwc.2019.2904883