منابع مشابه
Desorption by Ultrasound: Phenol on Activated Carbon and Polymeric Resin
An experimental feasibility study of using ultrasound to accomplish the dificult desorption of phenol from activated carbon and polymeric resin adsorbents is discussed. The desorption rates of activated carbon were found to significantly increase by ultrasound at 40 kHz and 1.44 MHz. Attrition of the activated carbon due to cavitation could be prevented by operating at a higher frequency and wi...
متن کاملEnhancing Mechanical Strength of Inorganic Geopolymer by Using Phenol Resin
The effect of organic phenol on the compressive and flexural strength of a metakaolin based geopolymer is studied. It was found that 12 wt% phenol resins can increase the compressive and flexural strength by 30% and 65% respectively. In addition, the reinforcing effect of phenol resin is higher in Na-PS and Na-PSS type geopolymers rather than Na-PSDS. Two distinct endothermic peaks were detecte...
متن کاملThermal Degradation and Stability of Accelerated-curing Phenol-formaldehyde Resin
In order to study the thermal stability of accelerated-curing PF resin, the curing behavior of fresh PF resin was investigated in the presence of single accelerator of methylolurea derivatives (MMU), magnesium hydrate (Mg(OH)2), 25% aqueous solution of sodium carbonate (Na2CO3), and propylene carbonate (PC). Also their optimum combination was added in fresh PF resin. The thermal stability of cu...
متن کاملEffect of phenol on the biological treatment of wastewaters from a resin producing industry.
The effect of phenol on the biological treatment of wastewaters from a resin producing industry was analyzed in a pre-denitrification system. First, the effect of phenol overloads on the removal of organic matter and nitrogen compounds was studied. During the overloads (from 250 to 4000 mg/L), phenol was detected in the effluent of the anoxic reactor but the system recovered fast after stopping...
متن کاملFabrication of Glass Fiber Reinforced Composites Based on Bio-Oil Phenol Formaldehyde Resin
In this study, bio-oil from fast pyrolysis of renewable biomass was added by the mass of phenol to synthesize bio-oil phenol formaldehyde (BPF) resins, which were used to fabricate glass fiber (GF) reinforced BPF resin (GF/BPF) composites. The properties of the BPF resin and the GF/BPF composites prepared were tested. The functional groups and thermal property of BPF resin were thoroughly inves...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Society of Chemical Industry, Japan
سال: 1946
ISSN: 0023-2734,2185-0860
DOI: 10.1246/nikkashi1898.49.106