51‐4: Collimated Organic Molecular Beam Made by Triple Nozzle Evaporator
نویسندگان
چکیده
We developed triple nozzle evaporator that can make collimated organic molecular beam. reduce inner pressure below final 1/150 times lower than general by using structure and recycling path. As a results, the angular flux distribution of is similar with cosine to 100 th graph. And 80% total are concentrated within only ±8° angle region. expect it will be helpful achieve ultra‐high resolution in AMOLED AR/VR increase material utilization mass production.
منابع مشابه
Growth mechanism of AlN by metal-organic molecular beam epitaxy
The phenomena that accompany the growth of aluminum nitride (AlN) by metal-organic molecular beam epitaxy with trimethylaluminum and ammonia as sources of aluminum and nitrogen, respectively, have been systematically investigated. Optimizing the growth temperature, flux ratios, and the ammonia injector temperature, we obtained an efficient growth with a rate of 500 nm/h and a low consumption of...
متن کاملExergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants
In this work, a novel dual-nozzle ejector enhanced triple-evaporator refrigeration cycle (DETRC) without separator is proposed to improve the performance of the conventional ejector one (CETRC). The performance of DETRC is analyzed and compared with CETRC in term of energy coefficient of performance (COPen). Under given operating conditions, the COPen improvement of the no...
متن کاملSarvate – Beam Triple Systems
A Sarvate–Beam Triple System SB(v, 3) is a set V of v elements and a collection of 3–subsets of V such that each distinct pair of elements in V occurs in i blocks, for every i in the list 1, 2, . . . , ( v 2 ) . In this paper, we completely enumerate all Sarvate-Beam Triple Systems for v = 5 and v = 6. (In the case v = 5, we extend a previous result of R. Stanton [8].) 1 Sarvate–Beam Designs Th...
متن کاملA Numerical Characterization of Particle Beam Collimation by an Aerodynamic Lens-Nozzle System: Part I. An Individual Lens or Nozzle
Particle beams have traditionally been produced by supersonic expansion of aparticle-ladengas through a single nozzle to vacuum. However, it has been shown that, by passing the particle-laden gas through a series of axi-symmetric subsonic contractions and expansions (an aerodynamic lens system) prior to the supersonic expansion to vacuum through a single nozzle, beam divergence can be signi ca...
متن کاملThree-dimensional collimated self-accelerating beam through acoustic metascreen
We report the generation of three-dimensional acoustic collimated self-accelerating beam in non-paraxial region with sourceless metascreen. Acoustic metascreen with deep subwavelength spatial resolution, composed of hybrid structures combining four Helmholtz resonators and a straight pipe, transmitting sound efficiently and shifting fully the local phase is evidenced. With an extra phase profil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sid's Digest Of Technical Papers
سال: 2023
ISSN: ['2154-6738', '2168-0159', '2154-6746', '0097-966X']
DOI: https://doi.org/10.1002/sdtp.16666