44fs Pulse Generation from an All-Solid-State Cr:LiSAF Laser.
نویسندگان
چکیده
منابع مشابه
Picosecond laser pulse generation in a monolithic self-Q-switched solid-state laser
We report the generation of laser pulses of 290-ps duration with 8-N pulse energy in single longitudinal mode and single transverse mode in a diode-end-pumped monolithic self-Q-switched Cr,Nd:YAG laser. The most commonly used method of generating picosecond laser pulses is the mode-locking technique. Mode-locking generally requires a light modulator such as an intracavity acousto-optical modula...
متن کاملAll - Solid - State Four - Color Laser
This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The goal of this project is to develop a solid state laser that produces visible output wavelengths, including the commercially compelling blue wavelength. The basic architecture of the device consists of a single-mode optical fiber doped with Pr3+ and ...
متن کاملSimultaneous multiwavelength generation from a mode-locked all-solid-state Cr:forsterite laser.
We demonstrate a multiple-channel, mode-locked, all-solid-state Cr:forsterite laser. By inserting an etalon into the laser cavity, we have generated 12 phase-locked channels with 9-19-ps pulse width near 1230 nm with 280-mW average output power from a single laser oscillator. By tuning the etalon bandwidth we can shorten the pulse width in a specific channel to 1.8 ps.
متن کامل55-fs pulse generation without wave-breaking from an all-fiber Erbium-doped ring laser.
We demonstrate the direct generation of 55 fs pulses from an all-fiber Erbium-doped ring laser oscillator using the nonlinear polarization rotation mode-locking. The average output power is 56.4 mW but limited by available pump power of 330 mW. The linear chirped pulse duration is 55 fs after recompression using standard single-mode fiber. The pulses show to resist optical wave breaking with a ...
متن کاملUltrashort Pulse Generation with a Solid State Cr 4 * : YAG Laser
A prismless ultrafast Cr4*:YAG laser has been designed and constructed. Intracavity dispersion in this laser is compensated through the use of double-chirped mirrors, in contrast to previous work, which used fused silica prisms. The resonator design for Kerr lens modelocking has been optimized through the use of numerical simulation programs, based on the ABCD transfer matrix formalism. Pulses ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 1995
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.23.996