3.NON-DESTRUCTIVE TESTING OF CONCRETE BY SOUND VELOCITY METHOD : Relation between sound velocity and quality of mortar-Part 1

Sound velocity measurement using transfer function method

Abstract The transfer function of a piezoelectric transducer, buffer rod and sample assembly is used to measure the sound velocity of solid materials. From the recorded transfer function, pulse echo patterns at frequencies of the passband of the input signal are reproduced after convoluting with monochromatic RF input signals. The time delay is obtained by performing pulse echo overlap and phas...

Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350

In the present work, the influence of aging temperature on mechanical properties and sound velocity of Maraging steel M350 was investigated. For this purpose, first, samples were solution annealed at 825◦C for 2 hours and then age hardened at 510◦C-600◦C for 3 hours. Hardness, tensile and impact tests were used for determining mechanical properties and longitudinal ultrasonic velocity was used ...

Sound velocity in carbon suboxide.

Sound field separation with sound pressure and particle velocity measurements.

In conventional near-field acoustic holography (NAH) it is not possible to distinguish between sound from the two sides of the array, thus, it is a requirement that all the sources are confined to only one side and radiate into a free field. When this requirement cannot be fulfilled, sound field separation techniques make it possible to distinguish between outgoing and incoming waves from the t...

the investigation of the relationship between type a and type b personalities and quality of translation

چکیده ندارد.