3D-TEM Study of Gamma Alumina Catalyst Supports
نویسندگان
چکیده
منابع مشابه
Synthesis and application of mesoporous gamma alumina granules as iridium catalyst support
Mesoporous gamma-alumina granules, which are known as a common catalyst support in industrial applications were synthesized via the sol gel-oil drop method having a diameter of 1-2 mm. The effect of calcination temperature (450 and 750 °C) on the properties of gamma alumina granules were studied and the functionality of 20 wt% iridium catalyst on the alumina granules for hydrazine decomposition...
متن کاملPhase-Transformation of Gamma-Allumina to Alpha-Alumina as an Industrial Catalyst Support
The phase transformation of aluminum hydrates yields various forms of alumina (d, q, K) and eventually alpha-alumina. The decrease in the specific surface area of alumina upon heat treatment is due to changes in crystalline structure and hence a decrease in the porosity of the material, Although the conversion of gamma-alumina to alpha-structure takes place with a lowering in surface area and p...
متن کاملTransmission Electron Microscopy (TEM) Characterization of doped α-Alumina
Qualitative EDX analysis: A map is acquired in low magnification. Results show equiaxial grains finely distributed through out the sample. In spite of the fact that simulations indicate no clear energetic gain or loss for cosegreation over single dopant segregation in this material, we observed that in all grain boundaries these two dopants (Y an La) are segregating together (figure 2). This co...
متن کاملAFM, SEM and TEM Studies on Porous Anodic Alumina
Porous anodic alumina (PAA) has been intensively studied in past decade due to its applications for fabricating nanostructured materials. Since PAA's pore diameter, thickness and shape vary too much, a systematical study on the methods of morphology characterization is meaningful and essential for its proper development and utilization. In this paper, we present detailed AFM, SEM and TEM studie...
متن کاملCatalyst supports for polymer electrolyte fuel cells.
A major challenge in obtaining long-term durability in fuel cells is to discover catalyst supports that do not corrode, or corrode much more slowly than the current carbon blacks used in today's polymer electrolyte membrane fuel cells. Such materials must be sufficiently stable at low pH (acidic conditions) and high potential, in contact with the polymer membrane and under exposure to hydrogen ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2006
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927606067869