3D printing preview for stereo-lithography based on photopolymerization kinetic models
نویسندگان
چکیده
منابع مشابه
Interpolating Spline Curve-Based Perceptual Encryption for 3D Printing Models
With the development of 3D printing technology, 3D printing has recently been applied to many areas of life including healthcare and the automotive industry. Due to the benefit of 3D printing, 3D printing models are often attacked by hackers and distributed without agreement from the original providers. Furthermore, certain special models and anti-weapon models in 3D printing must be protected ...
متن کاملRapid formation of regulated methacrylate networks yielding tough materials for lithography-based 3D printing
Multifunctional methacrylates are highly reactive monomers for radical photopolymerization, but yield brittle materials due to their inhomogeneous and highly crosslinked network architecture. Addition fragmentation chain transfer (AFCT) reagents serve as additives for the regulation of radical network formation and pave the way to photopolymer networks with high toughness. However, AFCT reagent...
متن کاملA Review on Stereo-Lithography
Stereo-lithography is a distinctive form of technology which permits for the translation of computer aided design illustration to3D solid items within hours. In Stereo-lithography melted plastic is solidified in particular patterns by laser beam consequential in solid epoxy realization of a 3D project. This ultraviolet laser beam is directed by CAD data. Parts created using Stereo Lithography m...
متن کاملMicrointaglio Printing for Soft Lithography-Based in Situ Microarrays
Advances in lithographic approaches to fabricating bio-microarrays have been extensively explored over the last two decades. However, the need for pattern flexibility, a high density, a high resolution, affordability and on-demand fabrication is promoting the development of unconventional routes for microarray fabrication. This review highlights the development and uses of a new molecular litho...
متن کاملA Laminar Flow-Based Microfluidic Tesla Pump via Lithography Enabled 3D Printing
Tesla turbine and its applications in power generation and fluid flow were demonstrated by Nicholas Tesla in 1913. However, its real-world implementations were limited by the difficulty to maintain laminar flow between rotor disks, transient efficiencies during rotor acceleration, and the lack of other applications that fully utilize the continuous flow outputs. All of the aforementioned limits...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bioactive Materials
سال: 2020
ISSN: 2452-199X
DOI: 10.1016/j.bioactmat.2020.05.006