3D printing polyurethane acrylate(PUA) based elastomer and its mechanical behavior

3D Printing of Transparent and Conductive Heterogeneous Hydrogel-Elastomer Systems.

A hydrogel-dielectric-elastomer system, polyacrylamide and poly(dimethylsiloxane) (PDMS), is adapted for extrusion printing for integrated device fabrication. A lithium-chloride-containing hydrogel printing ink is developed and printed onto treated PDMS with no visible signs of delamination and geometrically scaling resistance under moderate uniaxial tension and fatigue. A variety of designs ar...

The Fracture Energy and Some Mechanical Properties of a Polyurethane Elastomer

The energy required to form a unit of new surface in the fracture of a polyurethane elastomer is determined. The rate sensitivity of the material has been reduced by swelling it in toluene. This paper primarily describes the experimetal work of measuring the lower limit of the fracture energy. With this value and the creep compliance as a basis, the rate dependence of fracture energy for the un...

تهیه الاستومر پلی یورتانی با استفاده از HTPB سنتز شده به روش پلیمریزاسیون رادیکالی زنده با واسطه نایتروکساید: سنتز، (علمی-پژوهشی)

In order to increasing of hydroxy functionality of HTPB an in-situ nitroxide mediated polymerization (NMP) of 1,3-butadiene was carried out in presence of TEPA as a polyfunctional nitroxide precursor. The multi-modal molar mass distribution of the product was elucidated by reductive hydrolyzation of the oligomeric product. The new polyfunctional hydroxyl-terminated polybutadiene (PFHTPB) was c...

Printing low-voltage dielectric elastomer actuators

Investigation of the Properties of Polyurethane Elastomer Based on Synthesis and Characterization of PTHF-GAP-PTHF Triblock Copolymer

Binder has a key role in the performance of composite propellants. The binders are classified into two neutral and high-energy categories. GAP is one of the most important energetic binders, but it has poor mechanical and thermal properties. The goal of this investigation is to improve the properties of GAP by copolymerizing it with polytetrahydrofuran. New energy triblock copolymer was synthes...