3D-printing polymer-based permanent magnets
نویسندگان
چکیده
منابع مشابه
3D Analytical Calculation of the Interactions between Permanent Magnets
Up to now, the analytical calculation has been made only when the magnets own parallel magnetization directions. We have succeeded in two new results of first importance for the analytical calculation: the torque between two magnets, and the force components and torque when the magnetization directions are perpendicular. The last result allows the analytical calculation of the interactions when...
متن کاملProspects for nanoparticle-based permanent magnets
Magnetic nanoparticles smaller than ~15 nm in diameter and with high magnetocrystalline anisotropies K1 ≥ 1 MJ m can be used as building blocks for next-generation permanent magnets. Advances in processing steps are discussed, such as self-assembly, alignment of the easy axes and appropriate nanostructuring that will enable the fabrication of densely packed nanoparticle assemblies with improved...
متن کاملMagnetic Microactuators Based on Polymer Magnets
Integrated permanent magnet microactuators have been fabricated using micromachined polymer magnets. The hard magnetic material utilized is a polymer composite, consisting of magnetically hard ceramic ferrite powder imbedded in a commercial epoxy resin to a volume loading of 80%. The magnets have the form of thin disks approximately 4 mm in diameter and 90 m in thickness. These disks have been ...
متن کامل3d Printing for Prototypes of Thin-film Pzt/polymer Microstructures
This work explores the viability of using 3D printing as a rapid-prototyping technique for microrobotic appendages made from thin-film PZT/polymer materials. First, the possibility of integrating piezoelectric materials into millimeter-scale (meso-scale) polymer melt-printed structures was investigated. Next, one specific robot limb geometry was chosen as a basis to compare structural modeling ...
متن کاملMulti-Material 3D Inkjet Printing - Conductive Paths in Polymer Parts
In this paper the results of a research project that deals with the conceptual design and evaluation of cross-company logistics models are presented. A simulation and evaluation model was designed that supports the development of new logistics concepts. Therefore models for the calculation of emissions, of costs and of logistic competitiveness, have to be created and combined. Based on the sust...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2018
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2018.05.005