3D Printing of a Reactive Hydrogel Bio-Ink Using a Static Mixing Tool
نویسندگان
چکیده
منابع مشابه
Ink-Jet Printing Cotton with Cationic Reactive Dye Based Inks
The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...
متن کاملLayering of Copper-ink using 3D Printing & Characterization
The use of nano materials, particularly copper is of interest, in areas like printed electronics and chemical engineering. Copper is highly conductive in nature and thin films on a substrate makes the structure more significant. Printing copper requires melting of macro size particles conventionally, whereas the viscous mixture of nano ink composition, utilizing spray mechanism in 3D printing f...
متن کاملBacterial printing press that regenerates its ink: contact-printing bacteria using hydrogel stamps.
This paper describes the use of micropatterned agarose stamps prepared by molding against PDMS masters to print patterns of bacteria on agar plates. Topographically patterned agarose stamps were inked with suspensions of bacteria; these stamps generated patterns of bacteria with features as small as 200 microm over areas as large as 50 cm2. Stamps with many small features (>200 microm) were use...
متن کاملThe Effect of Reactive Dye Structure on the Ink-Jet Printing of Cotton
The purpose of this study was to investigate the effect of the structure of reactive dye on cotton ink-jet printing. Cotton fabric was printed upon with three commercial cellulosic reactive dyes which are based on the similar chromophore and possess different numbers of reactive and anionic groups. Colour yield and absorbed dye fixation of the printed cotton were evaluated at various pHs. The i...
متن کاملMultifunctional 3D printing of heterogeneous hydrogel structures
Multimaterial additive manufacturing or three-dimensional (3D) printing of hydrogel structures provides the opportunity to engineer geometrically dependent functionalities. However, current fabrication methods are mostly limited to one type of material or only provide one type of functionality. In this paper, we report a novel method of multimaterial deposition of hydrogel structures based on a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym12091986