3D Printed Pressure Sensor Based on Surface Acoustic Wave Resonator
نویسندگان
چکیده
منابع مشابه
Passive Downhole Pressure Sensor Based on Surface Acoustic Wave Technology
A passive surface acoustic wave (SAW) pressure sensor was developed for real-time pressure monitoring in downhole application. The passive pressure sensor consists of a SAW resonator, which is attached to a circular metal diaphragm used as a pressure transducer. While the membrane deflects as a function of pressure applied, the frequency response changes due to the variation of the SAW propagat...
متن کاملTiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملFilm bulk acoustic-wave resonator based ultraviolet sensor
This letter described ultraviolet UV radiation sensing with ZnO based film bulk acoustic-wave resonator FBAR . The resonant frequency upshifted when there was UV illumination on the FBAR. For 365 nm UV light, the frequency upshift was 9.8 kHz with an intensity of 600 W /cm2, and the detection limit of the sensor was 6.5 nW. The frequency increase in the FBAR UV sensor was proposed to be due to ...
متن کاملLayered Surface Acoustic Wave Hydrogen Sensor Based on Polyethylaniline Nanofibers
Here we report on a layered Surface Acoustic Wave (SAW) gas sensor featuring polyethylaniline nanofibers as the active layer. A rapidly-mixed reaction was employed to synthesize polyethylaniline nanofibers. The product was deposited on a microfabricated ZnO/36° YX LiTaO3 SAW transducer. Scanning Electron Microscopy (SEM) and Ultraviolet-visible spectroscopy (UV-vis) were utilized to characteriz...
متن کاملMass Sensitivity Optimization of a Surface Acoustic Wave Sensor Incorporating a Resonator Configuration
The effect of the sensitive area of the two-port resonator configuration on the mass sensitivity of a Rayleigh surface acoustic wave (R-SAW) sensor was investigated theoretically, and verified in experiments. A theoretical model utilizing a 3-dimensional finite element method (FEM) approach was established to extract the coupling-of-modes (COM) parameters in the absence and presence of mass loa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement Science Review
سال: 2021
ISSN: 1335-8871
DOI: 10.2478/msr-2021-0011