3D Numerical Analysis Model for TIG-MIG Hybrid Welding Process
نویسندگان
چکیده
منابع مشابه
Tig Welding Process Pdf
Tungsten inert gas (TIG) welding, also called as gas tungsten welding 1. (a) Schematic of TIG welding Process (b) Variety of tungsten electrodes. The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid. Tungsten inert gas welding, TIG is widely applied in manufacturing process for different The ...
متن کاملA Ga–ann Hybrid Model for Prediction and Optimization of Co2 Laser-mig Hybrid Welding Process
The paper presents a hybrid model of an Artificial Neural Network (ANN) and Genetic Algorithm (GA) for modeling of a hybrid laser welding process. This model is employed for the prediction and optimization of penetration depth with corresponding process parameters. A single program developed for the purpose initially establishes an optimized ANN architecture using a Back-Propagation Neural Netw...
متن کاملOptimization of TIG-MIG hybrid welding of 316L austenitic stainless steel
In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...
متن کاملOptimization of TIG-MIG hybrid welding of 316L austenitic stainless steel
In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...
متن کاملNumerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418
In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2012
ISSN: 0288-4771
DOI: 10.2207/qjjws.30.306