3D Modeling and Analysis of Jointed Rigid Airfield Pavement using ABAQUS
نویسندگان
چکیده
منابع مشابه
Neural Networks Analysis of Airfield Pavement Heavy Weight Deflectometer Data
The Heavy Weight Deflectometer (HWD) test is one of the most widely used tests for assessing the structural integrity of airport pavements in a non-destructive manner. The elastic moduli of the individual pavement layers predicted from the HWD deflection measurements through inverse engineering analysis are effective indicators of pavement layer condition. The primary objective of this study wa...
متن کاملAirfield Pavement Deicing with Conductive Concrete Overlay
Conductive concrete is a cementitious admixture containing a certain volumetric ratio of electrically conductive materials to attain high and stable electrical conductivity. Due to its electrical resistance, a thin overlay of conductive concrete can generate enough heat to prevent ice formation when energized by AC power. Under a research sponsored by Nebraska Department of Roads, Yehia and Tua...
متن کاملNeural Network-based Backcalculation Models for Non-Destructive Evaluation of Rigid Airfield Pavement Systems
Heavy Weight Deflectometer (HWD) tests were routinely conducted on three Portland Cement Concrete (PCC) test items in the Federal Aviation Administration’s (FAA's) National Airport Pavement Test Facility (NAPTF) to verify the uniformity of the test pavement structures and to measure pavement responses during full-scale traffic testing. A six-wheel aircraft landing gear with dual-tridem configur...
متن کاملscour modeling piles of kambuzia industrial city bridge using hec-ras and artificial neural network
today, scouring is one of the important topics in the river and coastal engineering so that the most destruction in the bridges is occurred due to this phenomenon. whereas the bridges are assumed as the most important connecting structures in the communications roads in the country and their importance is doubled while floodwater, thus exact design and maintenance thereof is very crucial. f...
Rigid Pavement Backcalculation Using Differential Evolution
The backcalculation of pavement layer moduli from Falling Weight Deflectometer (FWD) measured surface deflections is a challenging task. It can also be formulated as a global optimization problem with the objective of finding the optimal pavement layer moduli values that minimize the error between measured and computed surface deflections. Over the years, several backcalculation methodologies h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Conference on Civil and Architecture Engineering
سال: 2016
ISSN: 2636-4387
DOI: 10.21608/iccae.2016.43471