3D Microstructural Finite Element Simulation of Martensitic Transformation of TRIP Steels
نویسندگان
چکیده
منابع مشابه
Martensitic transformation of individual grains in low-alloyed TRIP steels
E. Jimenez-Melero,* N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright and S. van der Zwaag Fundamental Aspects of Materials and Energy, Faculty of Applied Sciences, Delft University of Technology, Mekelweg 15, 2629 JB Delft, The Netherlands Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands European Synchrotro...
متن کاملStress-Assisted Isothermal Martensitic Transformation Application to TRIP Steels
Low-temperature plastic flow in TRIP steels has been found to be controlled by stress-assisted isothermal martensitic transformation. For these conditions, the thermodynamics and kinetic theory of martensitic transformations leads directly to constitutive relations predicting the dependence of flow stress on temperature, strain, strain-rate, and stress-state, consistent with the observed behavi...
متن کاملDriving force for martensitic transformation in steels
recently determined LVl~ to be 111918 J mol-I at temperatures below 1000 K, and pointed out that their experimental data were free from various 'intercept effects' which had dogged earlier investigations. Similarly, for T<1000K, they deduced '\~s=51.44Jmol-IK-I. There seem to be no data on the variation of LVl~ or ,\~s as a function of x. However, Lobo and Geigerl found that LVll: and ,\S~S do ...
متن کامل3D finite element simulation of effects of deflection rate on energy absorption for TRIP steel
Recently, with the requirement of lighter weight and more safety for a design of automobile, energy absorption capability of structural materials has become important. TRIP (Transformation-induced Plasticity) steel is expected to apply to safety members because of excellent energy absorption capability and ductility. Past studies proved that such excellent characteristics in TRIP steel are domi...
متن کاملAnalysis of deformation induced martensitic transformation in stainless steels
Many studies monitoring the formation of martensite during the tensile deformation of austenite report data which are, in principle, affected by both the applied stress and the resulting plastic strain. It is not clear in these circumstances whether the transformation is stress induced (i.e. the stress provides a mechanical driving force) or whether the generation of defects during deformation ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Latin American Journal of Solids and Structures
سال: 2018
ISSN: 1679-7825,1679-7817
DOI: 10.1590/1679-78254533