33) Welded Joint of Round Bars by Flash-butt Welding.
نویسندگان
چکیده
منابع مشابه
The Effect of the AA7075 Interlayer on the Microstructure and Mechanical Properties of the AA1050 Butt Joint Welded by FSW
In this research, the FSW Butt joint of commercial aluminum 1050 was investigated by using the 7075 aluminum alloy interlayer on the linear velocity of 30, 50 and 100 mm / min, and rotational speeds of 800 and 1200 rpm. A threaded cylindrical tool was used for joining of the 5 mm sheets. The OM, SEM, microhardness and tensile tests were done. The results shows that in sample with an interlayer ...
متن کاملThe Effect of the AA7075 Interlayer on the Microstructure and Mechanical Properties of the AA1050 Butt Joint Welded by FSW
In this research, the FSW Butt joint of commercial aluminum 1050 was investigated by using the 7075 aluminum alloy interlayer on the linear velocity of 30, 50 and 100 mm / min, and rotational speeds of 800 and 1200 rpm. A threaded cylindrical tool was used for joining of the 5 mm sheets. The OM, SEM, microhardness and tensile tests were done. The results shows that in sample with an interlayer ...
متن کاملCorrection of Butt-welding Induced Distortions by Laser Forming
Welding-induced distortion is an intrinsic phenomenon arising due to the thermally induced strain distributions in the weld and surrounding material. The distortion can be minimized during the pre-process, real-time, or postprocess stages. In the present paper, the laser forming (LF) technology is utilized for the post correction of welding-induced distortion. The out-of-plane distortion can be...
متن کاملCFD Modelling of Friction Stir Welding of Aluminum to Steel butt joint
In this article effects of friction stir welding (FSW) tool rotational and traverse speeds were studied on heat generation and temperature distribution in welding zone of AA1100 aluminum alloy and A441 AISI joint. Computational fluid dynamics method was used to simulate the process with commercial CFD Fluent 6.4 package. To enhance the accuracy of simulation in this Study, the welding line that...
متن کاملCorrection of Butt-Welding induced Distortion by Laser Forming
Welding-induced distortion is an intrinsic problem arising due to the mismatch of thermal expansions in the weld and surrounding material. The distortion can be minimized through the pre-process, in process, or post-process methodology. In the present paper, the laser forming (LF) technology is utilized for the post correction of the welding-induced distortion. Three types of weld paths are app...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Institute of Japanese Architects
سال: 1939
ISSN: 0387-1169,2432-9991
DOI: 10.3130/aijsaxxxx.13.0_266