3-D FEM Stress Analysis and Strength Prediction of Band Scarf Adhesive Joints Subjected to Static Bending Moments
نویسندگان
چکیده
منابع مشابه
Lifetime prediction of adhesive joints subjected to variable amplitude fatigue
Almost all structural applications of adhesive joints will experience cyclic loading and in most cases this will irregular in nature, a form of loading commonly known as variable amplitude fatigue (VAF). This paper is concerned with the VAF of adhesively bonded joints and has two main parts. In the first part, results from the experimental testing of adhesively bonded single lap joints subjecte...
متن کاملStrength of Composite Scarf Joints
In recent years, large composite structures have been used increasingly in the aerospace and naval industries. Such a large composite structure is mostly fabricated using the scarf joining technique so that multiple substructures can be connected together. Figure 1 shows three commonly used scarf joint configuration. Among the three, the step/overlap joint is considered as the strongest because...
متن کاملInteraction of laminate damage and adhesive disbonding in composite scarf joints subjected to combined in-plane loading and impact
Impact tests were carried out on composite laminates and composite scarf repairs, while both were subjected to in-plane loading with tensile pre-strain levels up to 5000 microstrain. The results show that pre-straining of the composite laminates has no noticeable influence on the size of the delamination area for the given impact energy of 8 J, which represents a typical barely-visible impact o...
متن کاملStatic and Fatigue Behavior of Adhesive Joints
This paper discusses the static and fatigue behavior of adhesively bonded single lap joints in SMC-SMC composites. Effects of lap length and adhesive thickness on the static and fatigue strength of SMC-SMC adhesive joints are studied. Effects of SMC surface preparation and test speed on the joint performance are evaluated. Finally, the effect of water exposure on the joint durability is also in...
متن کاملStress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads
In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Adhesion Society of Japan
سال: 2013
ISSN: 0916-4812,2187-4816
DOI: 10.11618/adhesion.49.370