3-D Design and Simulation of a Piezoelectric Micropump
نویسندگان
چکیده
منابع مشابه
Design and Simulation of A Piezoelectric Actuated Valveless Micropump
In this work, we design and simulate a valve less, diaphragm-based, piezoelectric micro pump. The piezoelectric actuator is a PZT-5H piezo-disk, the diaphragm is a borosilicate glass plate. All the simulations were made using COMSOL Multiphysics software. First, the piezoelectric actuator and membrane thicknesses were chosen by means of a stationary simulation, using the piezoelectric devices m...
متن کاملsimulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولA Resonantly-Driven Piezoelectric Micropump for Microfactory
For realization of micro fluid power sources applicable to microfactory or micromachines using fluid power with high power density, a resonantly-driven piezoelectric micropump with newly devised check valve unit is developed and a practical application to micro press is attempted. First, a micro sheet valve having a floating valve-body inside valve chest to increase valve-opening and to decreas...
متن کاملDesign and Simulation of Piezoelectric MEMS Cantilever
In this paper, a Micro – Electrical Mechanical System (MEMS) energy harvester is developed, using the phenomenon of Piezoelectricity. Zinc Oxide (ZnO) was chosen as the piezoelectric material. A multi – d31 mode cantilever design was used with varying dimensions of cantilever, to form an array. The individual cantilevers can be either connected in series or parallel to achieve different output ...
متن کاملOptimization of a circular piezoelectric bimorph for a micropump driver
Piezoelectric bimorph actuation has been successfully used in numerous types of microdevices, most notably micropumps. However, even for the simple case of circular geometry, analytical treatments are severely limited. This study utilized the finite-element method to optimize the deflection of a circular bimorph consisting of a single piezoelectric actuator, bonding material and elastic plate o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2019
ISSN: 2072-666X
DOI: 10.3390/mi10040259